Description
Speer's TMJ line has earned a loyal following among handloaders who want the clean-burning feel of a plated bullet with the toughness of a jacketed one. The 4399 is a .400 diameter, 155 grain flat nose projectile built for .40 S&W and 10mm reloading, and it leans on Speer's Uni-Cor process to fully enclose the lead core in a seamless copper jacket. That full encapsulation is the whole point here. There is no exposed lead at the base, so you get less airborne lead and a cleaner burn than you'd see from a traditional FMJ.
What Makes the Speer 4399 TMJ Worth Loading
The flat nose profile feeds reliably in most .40 caliber pistols and punches clean holes in paper, which is why this weight is a staple for practice and competition loads. It carries a ballistic coefficient of .125 and a sectional density of .138, and it runs without a cannelure, so you'll want to set a consistent crimp off a solid bullet seating depth. The jacket wraps the core top to bottom, which keeps barrel fouling down and makes for predictable performance shot after shot.
Dialing In Your .40 Cal Loads with the 4399
Since this is a 155 grain bullet, you've got a bit of flexibility between snappy practice loads and something that mimics defensive point of aim. Speer and the major powder makers publish solid data for this weight across common pistol powders like Unique, Power Pistol, Titegroup, Universal, and WSF. As always, start low and work up while watching for pressure signs. The seamless jacket and consistent dimensions make the 4399 an easy bullet to get grouping well once you find your node.
Who Reaches for These TMJ Bullets
If you shoot .40 S&W or 10mm in any real volume and reload to keep costs down, this is a workhorse component. It bridges the gap between cheap plated bullets and premium jacketed options, giving you clean, repeatable results without a fuss.
Key Specifications
- Manufacturer: Speer
- Manufacturer Part Number: 4399
- UPC: 076683043993
- Bullet Caliber: .40 Caliber / 10mm
- Bullet Diameter: .400
- Bullet Weight: 155 gr
- Bullet Type: Total Metal Jacket (TMJ) Flat Nose
- Jacket Material: Copper
- Core Material: Lead
- Ballistic Coefficient: .125
- Sectional Density: .138
- Cannelure: No
- Construction: Uni-Cor seamless jacket
- Recommended Usage: Target / Practice
- Quantity: 100 Per Box
What’s Included
- 100 Speer 4399 TMJ .40 caliber 155 gr flat nose bullets
Frequently Asked Questions
What is the difference between the Speer 4399 TMJ and a standard FMJ bullet?
A standard FMJ leaves lead exposed at the base, while the Speer 4399 TMJ uses Uni-Cor technology to fully encapsulate the lead core in a seamless copper jacket. That means no exposed lead on the base, which cuts down on airborne lead and helps keep the bore cleaner. For reloaders it also tends to deliver more consistent results shot to shot.
What cartridges can I load the Speer 4399 155 gr bullets in?
At .400 diameter and 155 grains, this bullet is designed for .40 S&W and 10mm Auto reloading. There's published load data for this weight across common pistol powders, so you can tune it for anything from light practice loads to fuller-power range ammo. Always start low and work up using current data from Speer or your powder manufacturer.
Does the Speer 4399 TMJ have a cannelure?
No, the 4399 does not have a cannelure. Because of that, you'll want to rely on a consistent bullet seating depth and apply a light taper crimp to secure the case mouth rather than a roll crimp. This is standard practice for the .40 S&W, which headspaces on the case mouth.
How many bullets come in a box of Speer 4399?
Each box contains 100 bullets. These are projectiles only for reloading, not loaded ammunition, so they do not include brass, primers, or powder.




Reviews
There are no reviews yet.