Description
Speer has been building Hot-Cor bullets for decades, and this .30 caliber 150-grain soft point flat nose is a straightforward, proven component for anyone loading their own hunting rounds. Measuring .308 in diameter with a .915" overall length, it carries a G1 ballistic coefficient of .255 and a sectional density of .226, putting it right in the sweet spot for .30 caliber cartridges used on deer, hogs, and similar medium to large game.
What the Hot-Cor Process Brings to the Table
The name says it all. Instead of pressing a cold, pre-formed lead slug into the jacket, Speer pours molten lead directly into the brass jacket during manufacturing. That method fills the jacket uniformly, cuts down on voids and air pockets, and eliminates the lead oxide layer you get with conventional cold-core construction. The payoff on game is a bullet that resists core-jacket separation, holds its weight together, and drives deep while still opening up the way a soft point should.
Loading the Speer .30 Cal 150gr Flat Nose
The flat nose profile makes this a solid pick if you're feeding a tube-magazine rifle, since the blunt tip sits safely against the primer of the round ahead of it. At 150 grains it's a versatile weight across the .30 caliber family, from .30-30 and .300 Savage to .308 and .30-06, and it plays nicely with most published load data. The brass jacket tapers from a thicker shank toward a thinner nose, which helps control expansion and retain weight once it makes contact.
Why Reloaders Keep Reaching for Speer Hot-Cor
There's a reason this design has stuck around so long. It gives you consistent, repeatable performance without a premium price tag, so you can work up an accurate hunting load and shoot enough of them to really dial it in. For handloaders who want dependable field results and a bullet that behaves the same way every time, these Hot-Cor flat nose projectiles are a no-nonsense choice that earns its keep season after season.
Key Specifications
- Manufacturer: Speer
- Manufacturer Part Number: 2011
- UPC: 076683020116
- Caliber: .30 Caliber
- Bullet Diameter: .308"
- Bullet Weight: 150 Grain
- Bullet Type: Soft Point Flat Nose (SPFN)
- Jacket Material: Brass
- Ballistic Coefficient (G1): .255
- Sectional Density: .226
- Overall Length: .915"
- Construction: Hot-Cor (molten-lead core)
- Quantity: 100 Per Box
- Application: Medium to Large Game
What’s Included
- 100 Speer Hot-Cor .30 Caliber 150 Grain Soft Point Flat Nose bullets
Frequently Asked Questions
Are Speer Hot-Cor bullets bonded?
Not in the modern sense of a chemically bonded design like Speer's Gold Dot or Fusion. The Hot-Cor is a cup-and-core bullet, but pouring molten lead into the jacket creates strong adhesion and cuts down on core slippage. It performs more like a bonded bullet than a standard cold-core soft point, but if you want a true bonded projectile, look at a different Speer line.
What is the Hot-Cor process?
Hot-Cor means the lead core is poured into the jacket while molten instead of pressing in a pre-formed cold slug. This fills the jacket evenly, reduces voids and air pockets, and eliminates the lead oxide layer found in conventional construction. The result is a bullet that holds together better on impact for deeper penetration and reliable expansion.
What cartridges can I load these .30 caliber 150gr bullets in?
These .308 diameter 150-grain bullets work across the .30 caliber family, including .30-30 Winchester, .300 Savage, .308 Winchester, and .30-06 Springfield. The 150-grain weight is a versatile all-around choice for medium and large game. Always check current published load data for your specific cartridge before working up a load.
Is the flat nose profile safe for tube-magazine rifles?
Yes. The soft point flat nose shape is designed with tubular magazines in mind, since the blunt tip rests safely against the primer of the cartridge ahead of it. That makes it a good fit for lever guns like the .30-30 as well as bolt-action and single-shot rifles.




Reviews
There are no reviews yet.