Description
The 90-grain AccuBond is one of those 6mm bullets that just flat-out works when you're building a serious deer or antelope load. Nosler uses a proprietary bonding process that fuses the copper-alloy jacket to the lead-alloy core and eliminates voids, so the bullet holds together and keeps its weight even when it punches through bone at high velocity. That's the whole reason reloaders reach for it over a standard cup-and-core: you get a bullet that opens up wide, drives deep, and still leaves the barrel cleaner thanks to the gilding metal jacket that fouls less than pure copper alternatives.
What the 90gr AccuBond Brings to a .243 Load
This bullet measures 0.243 in diameter with a 90-grain weight, a G1 ballistic coefficient of 0.376, and a sectional density of 0.218. The spitzer profile and boat-tail base work together to cut drag and hang onto velocity downrange, which is exactly what you want when a shot stretches past 200 yards. Overall bullet length runs about 1.110 inches, and there's no cannelure, so you've got freedom to tune your seating depth to whatever your rifle likes best.
Dialing In the Nosler AccuBond in 6mm
Handloaders running the .243 Winchester, 6mm Remington, 6mm Creedmoor and similar cartridges have had real success with this one. Depending on your powder and barrel, folks commonly push it in the neighborhood of 3,100 fps and still hold tight groups, and plenty of reloaders report sub-MOA accuracy from factory rifles. It pairs nicely with powders like IMR 4350, IMR 4831 and Reloder 22 in the .243 Win case.
Field Performance You Can Count On
The white polymer tip does double duty here. It resists deformation in the magazine under recoil and kicks off reliable expansion the moment it hits. On deer and antelope, the AccuBond has earned a strong reputation for that flat-faced mushroom and consistent weight retention, which translates to good penetration and clean, humane kills. If you want a bonded 6mm bullet that behaves the same whether the shot is close or long, this is a tough one to beat.
Key Specifications
- Manufacturer: Nosler
- Manufacturer Part Number: 56357
- UPC: 054041563574
- Bullet Caliber: 6mm
- Bullet Diameter: .243 in
- Bullet Weight: 90 Grain
- Bullet Style: Spitzer Boat Tail, Polymer Tip
- Bullet Type: AccuBond (Bonded Core)
- Ballistic Coefficient (G1): 0.376
- Sectional Density: 0.218
- Overall Length: 1.110 in
- Cannelure: No
- Jacket Material: Copper-Alloy Gilding Metal
- Core Material: Lead-Alloy
- Quantity: 50 Per Box
- Country of Origin: United States
What’s Included
- 50 Nosler 6mm (.243) 90gr AccuBond spitzer boat tail bullets
Frequently Asked Questions
What cartridges can I load the 90gr AccuBond 6mm bullet in?
This .243 diameter bullet works in any 6mm cartridge that handles a 90-grain projectile, including the .243 Winchester, 6mm Remington, 6mm Creedmoor, 6mm ARC, .240 Weatherby Magnum and .243 WSSM. Reloaders have had good results with powders like IMR 4350, IMR 4831 and Reloder 22 in the .243 Win. Always start low and work up using current published load data for your specific cartridge.
Is the Nosler AccuBond a good bullet for deer out of a .243?
Yes, it's one of the more popular choices for deer and antelope in the 6mm class. The bonded core gives you strong weight retention and deep penetration, and the expanded bullet leaves a wide wound channel for clean kills. Plenty of hunters report dropping whitetail and mule deer with it well past 200 yards.
What makes the AccuBond different from a standard Ballistic Tip?
The big difference is the bonding process. Nosler fuses the jacket to the core so it stays together on impact and retains more weight, which means deeper penetration on bigger or quartering game. A standard Ballistic Tip tends to open faster and shed more weight, so the AccuBond is the pick when you want controlled expansion with more penetration.
Does this 6mm AccuBond bullet have a cannelure?
No, there's no cannelure on this bullet. That gives you the flexibility to set your seating depth wherever your rifle shoots best rather than crimping to a fixed groove. Many reloaders find that tuning seating depth is key to squeezing the best accuracy out of the AccuBond.






Reviews
There are no reviews yet.