Description
The Nosler Custom Competition line was built around one goal: putting rounds in the same hole at distance. This 80 grain .224 diameter hollow point boat tail sits at the heavy end of the .22 caliber range, which makes it a favorite for folks shooting high power across the course, service rifle, and long range target work out of fast-twist barrels. Nosler pairs their concentric Custom Competition jackets with ultra-precise lead-alloy cores, and every bullet gets hand-inspected before it goes in the box, so you are starting your load development on even footing.
What Sets the Custom Competition 80 Grain Apart
The shape is where this bullet earns its keep. A small meplat from the hollow point cuts drag up front, while the long boat-tail base keeps things stable as velocity bleeds off downrange. That combination gives it a G1 ballistic coefficient of .415 with a sectional density of .228, numbers that hold up well in wind and let the bullet carry energy and stay supersonic further out. Overall length runs 1.065 inches, so it is a long projectile that wants a proper fast-twist throat to stabilize.
Feeding Your .22 With the Nosler Custom Competition
Here is the big one to pay attention to: this 80 grain bullet needs a minimum 1-8 inch twist to stabilize properly, and a lot of competition shooters run it best in 1-7 twist barrels. If your rifle is a standard 1-9 or slower, the lighter Custom Competition offerings are a better fit. These are component bullets for handloading, not loaded ammunition, so you will be seating them in your own prepped brass. The 80 grain also runs long, which means many shooters single-feed them for the longer stages rather than loading to magazine length.
Bottom line, if you are reloading for an accurate .22 with the right twist and chasing tight groups at distance, these Noslers give you a consistent, hand-inspected component to build a load around without breaking the bank on premium match projectiles.
Key Specifications
- Manufacturer: Nosler
- Manufacturer Part Number: 53080
- UPC: 054041530804
- Caliber: 22 Caliber
- Bullet Diameter: .224"
- Bullet Weight: 80 Grain
- Bullet Style: Hollow Point Boat Tail (HPBT)
- Ballistic Coefficient (G1): 0.415
- Sectional Density: 0.228
- Overall Length: 1.065"
- Cannelure: No
- Core Material: Lead
- Jacket Material: Copper
- Minimum Twist Rate: 1-8"
- Quantity: 250 Count
- Country of Origin: United States
What’s Included
- 250 Nosler Custom Competition .22 caliber (.224") 80 grain HPBT bullets
Frequently Asked Questions
What twist rate do I need for the Nosler Custom Competition 80 grain .224?
This bullet requires a minimum 1-8 inch twist to stabilize, and many competition shooters prefer a 1-7 twist for the most consistent results. Because it is a long, heavy-for-caliber projectile, slower twists like 1-9 or 1-12 will not stabilize it reliably. If your barrel is slower than 1-8, a lighter Custom Competition bullet is the better call.
Are these loaded cartridges or just the bullets?
These are component bullets for handloading only, not loaded ammunition. You are getting 250 projectiles to seat in your own prepped and primed brass during load development. You will need your own cases, powder, and primers to build finished rounds.
What kind of shooting is the 80 grain Custom Competition best suited for?
Nosler designed this bullet for match and competition use, including high power across the course, service rifle, and long range target shooting. The high BC and long boat-tail profile help it buck wind and hold velocity at distance. It is a solid all-around choice for accurate .22 rifles with the right twist.
Will the 80 grain Custom Competition feed from a magazine?
Because the 80 grain runs long at 1.065 inches, many shooters single-feed it for longer stages rather than loading to magazine length. Depending on your chamber throat and magazine, you may need to seat deeper or single-load to get the most accurate seating depth. It is worth testing both approaches during load workup.





Reviews
There are no reviews yet.