Description
The Nosler RDF (Reduced Drag Factor) is a .224 diameter, 70 grain hollow point boat tail built for one thing: squeezing the most performance out of a long-range .22 caliber rifle. With a G1 ballistic coefficient of 0.416 and a sectional density of 0.199, this bullet is tuned to cut through the air and hold its line downrange. If you load for 223 Remington, 22 Creedmoor, 22-250, or similar cases and you care about printing small groups at distance, this is a projectile worth a long look.
What Makes the RDF .224 70 gr Tick
The whole RDF line was designed from the ground up to deliver high BCs, which is what gives you the flattest trajectory and the least wind drift possible. The magic is in two features working together: a meticulously optimized compound ogive that blends tangent and secant profiles, and a long, aggressive boat tail that reduces drag at the tail end. That sleek form factor is what sets the RDF apart from older, chunkier match bullets.
Less Prep Work With the Nosler RDF
One of the best things about these bullets is what you do not have to do. RDF projectiles have the smallest, most consistent meplats of any hollow point match bullet line, so there is no need to point the tips or trim them to get uniform results. That consistency out of the box translates to tighter, more repeatable groups and saves you a bunch of time at the bench. The compound ogive is also forgiving of seating depth, which makes dialing in your load a lot less fussy.
Getting the Most From These .224 Bullets
These are a long bullet for the caliber at 0.965 inches, so twist rate matters. Plan on running a minimum 1-9 inch twist, and a 1-8 twist will stabilize them with more margin, especially in cold or thin air. Keep in mind these are component bullets for handloading only and not loaded ammunition. Pair them with quality brass, a good primer, and a proven powder charge and you have the makings of a serious match or varmint load.
Key Specifications
- Manufacturer: Nosler
- Manufacturer Part Number: 53067
- Model: RDF Match
- UPC: 054041530675
- Caliber: .22 Caliber (.224)
- Bullet Diameter: 0.224"
- Bullet Weight: 70 Grains
- Bullet Style: Hollow Point Boat Tail (HPBT)
- Bullet Length: 0.965"
- Ballistic Coefficient (G1): 0.416
- Ballistic Coefficient (G7): 0.211
- Sectional Density: 0.199
- Jacket Material: Copper
- Cannelure: No
- Recommended Use: Competition / Target / Match
- Quantity: 500 Count
What’s Included
- 500 Nosler RDF .224 70 gr HPBT match bullets (component projectiles, unloaded)
Frequently Asked Questions
What twist rate do I need for the Nosler RDF .224 70 gr bullet?
Plan on a minimum 1-9 inch twist to stabilize this bullet, since at 0.965 inches it runs longer than typical lightweight .22 projectiles. A 1-8 twist will give you more stability margin, which helps in colder temperatures or at higher elevation. If you are running a slower twist barrel, lighter bullets will be a better fit.
Are these Nosler RDF .224 bullets loaded ammunition?
No, these are component bullets for handloading only. The box contains 500 projectiles that you seat into your own prepped brass with your chosen powder and primer. They are not ready to shoot straight from the box.
Do I need to point or trim the tips on these RDF bullets?
No, and that is one of the main draws. Nosler produces the RDF line with the smallest, most consistent meplats of any hollow point match bullet they make, so there is no need to point or trim tips to get uniform results. You get tight, repeatable groups without the extra prep work.
What cartridges work well with the Nosler RDF .224 70 gr?
This bullet is a popular choice for match-grade 223 Remington and 5.56 NATO loads, and it also shines in cases like the 22 Creedmoor and 22-250 for longer range work. The high BC and sleek profile make it well suited to any .22 caliber rifle built for precision at distance. Just confirm your barrel twist can stabilize it before loading up a big batch.




Reviews
There are no reviews yet.