Description
Nosler built the Custom Competition line for folks who care about where every shot lands, and the 6.5mm 140gr HPBT is one of the most popular picks in the .264 world. These bullets pair the accuracy of Nosler's Custom Competition jackets with their own ultra-precise, form-fitted lead-alloy cores, which is the combination that earned them a reputation as a true match standard. The jacket is highly concentric and the core is seated for balance, so you get repeatable results across a string without babying your load.
What Makes the 6.5mm 140gr Custom Competition Tick
The design is all about efficiency. A small hollow point meplat cuts drag up front while the pronounced boat tail cleans up the airflow at the base, giving this bullet a 0.529 G1 ballistic coefficient and a 0.287 sectional density. That translates to a flat, predictable arc and good resistance to wind over distance. The overall length runs right around 1.307 inches, which is handy to know when you are sorting out seating depth and magazine fit.
Loading the Nosler Custom Competition .264
This is a reloading bullet, so there is no cannelure and no crimp groove to work around, which gives you freedom to tune seating depth to your chamber. It feeds a long list of popular 6.5mm cartridges including 6.5 Creedmoor, 6.5×47 Lapua, 6.5×284 Norma, 6.5 PRC, and the old .264 Winchester Magnum. A 1:8 twist or faster barrel will stabilize the 140-grain weight nicely, which covers most modern precision rigs.
Who Reaches for These Bullets
High Power and long-range crowds have leaned on Nosler Custom Competition for years, and it is just as at home on the bench for load development or a weekend of ringing steel. Every bullet is hand-inspected before it leaves the plant in the USA, so what you pour into your trays is ready to build accurate ammo without a lot of extra sorting.
Key Specifications
- Manufacturer: Nosler
- Manufacturer Part Number: 49823
- UPC: 054041498234
- Caliber: 6.5mm (.264)
- Bullet Diameter: 0.264 in
- Bullet Weight: 140 grain
- Bullet Style: Hollow Point Boat Tail (HPBT)
- Ballistic Coefficient (G1): 0.529
- Sectional Density: 0.287
- Overall Length: 1.307 in
- Cannelure: No
- Jacket Material: Copper
- Core Material: Lead
- Country of Manufacture: United States
- Box Quantity: 250 bullets
What’s Included
- 250 Nosler Custom Competition 6.5mm (.264) 140gr HPBT reloading bullets
Frequently Asked Questions
What cartridges can I load with the Nosler Custom Competition 6.5mm 140gr?
These .264 diameter bullets work in any 6.5mm cartridge you handload, including 6.5 Creedmoor, 6.5×47 Lapua, 6.5×284 Norma, 6.5 PRC, and .264 Winchester Magnum. Since they are component bullets with no cannelure, you have room to tune seating depth to your specific chamber. They are a very common choice for precision and match builds.
What twist rate do I need to stabilize the 140-grain Custom Competition?
A 1:8 twist or faster will stabilize the 140-grain weight reliably, which matches most modern 6.5mm precision barrels. Slower twists may struggle to fully stabilize a bullet this long, so check your barrel before loading. Most current 6.5 Creedmoor and similar rifles already run 1:8 from the factory.
Are these loaded ammunition or just bullets?
These are component bullets only, meaning the projectiles you seat into your own prepped brass. There is no powder, primer, or case included. They are made for reloaders building match-grade ammunition from scratch.
What makes the Nosler Custom Competition different from a standard bullet?
Nosler combines a highly concentric Custom Competition jacket with an ultra-precise, form-fitted lead-alloy core for balance and consistency. Each bullet is hand-inspected before it ships, which is why the line has a strong following with High Power and long-range crowds. The 0.529 G1 ballistic coefficient also helps it hold velocity and buck wind downrange.




Reviews
There are no reviews yet.