Description
The Nosler Partition has been the measuring stick for premium hunting bullets since 1948, and this 6mm (.243 diameter) 100-grain Spitzer is the handloader's answer when you want performance you can count on in the field. It's built around Nosler's dual-core design with a fully tapered copper-alloy jacket, giving you fast, controlled expansion up front and a protected rear core that drives deep. For anyone loading a .243 Winchester, 6mm Remington, or similar 6mm cartridge for deer and medium game, this is one of those bullets that just works.
What Makes the Partition 6mm Design Tick
The jacket is the heart of the Partition. It's thin at the mouth so the nose opens up right away, then thickens along the shank so expansion stays controlled whether you catch game up close at high velocity or stretch things out where speeds drop off. Behind the front core sits that integral partition, the little wall of jacket material that supports the mushroom and keeps the rear lead core intact. That rear core holds onto better than two-thirds of the original bullet weight, which is why Partitions have a reputation for punching through bone and still reaching the vitals.
Loading the Nosler Partition 100 gr Spitzer
These are component bullets, so you're seating them in your own brass with your own powder charge. The Spitzer profile carries a G1 ballistic coefficient of 0.384 and a sectional density of 0.242, with an overall bullet length right around 1.065 inches. That BC isn't going to win long-range benchrest matches, but inside normal hunting distances it holds velocity and energy just fine, and the real payoff is what happens on impact. The 100-grain weight is a classic choice for a 6mm, giving you enough bullet to handle whitetail-sized game without beating up your shoulder.
Every bullet gets a visual inspection at the factory before the box is sealed, so you're starting your load development with consistent components. If you've been running factory ammo and want to tune a load that shoots tight and hits hard, the Partition is a tried-and-true place to start.
Key Specifications
- Manufacturer: Nosler
- Model: Partition
- Manufacturer Part Number: 35642
- UPC: 054041356428
- Caliber: 6mm (.243)
- Bullet Diameter: .243"
- Bullet Weight: 100 Grain
- Bullet Profile: Spitzer Point
- Bullet Type: Partition (dual-core)
- Jacket Material: Copper Alloy
- Core Material: Lead
- Cannelure: No
- G1 Ballistic Coefficient: 0.384
- Sectional Density: 0.242
- Overall Length: 1.065"
- Quantity: 50 Per Box
What’s Included
- 50 Nosler Partition 6mm (.243) 100 gr Spitzer Point component bullets
Frequently Asked Questions
What cartridges can I load the Nosler Partition 6mm 100 gr in?
These are .243 diameter bullets, so they work in any 6mm cartridge that uses a .243 projectile. That covers popular rounds like the .243 Winchester and 6mm Remington, along with cartridges like the .240 Weatherby Magnum. The 100-grain weight is a classic deer and medium game choice for these calibers.
Are these loaded cartridges or component bullets?
These are component bullets only, not loaded ammunition. You'll seat them in your own prepped brass with your chosen powder and primer during reloading. There's no cannelure on this bullet, so you can seat to your rifle's preferred depth for best accuracy.
How much weight does the Partition hold onto after impact?
The integral partition wall supports the expanded nose and protects the rear core, which retains better than two-thirds of the original bullet weight. That retained weight is what gives the Partition its reputation for deep, reliable penetration. The front core expands quickly for a wide wound channel while the back drives through.
What is the ballistic coefficient on the 6mm 100 gr Partition?
This bullet carries a G1 ballistic coefficient of 0.384 and a sectional density of 0.242. That's a solid combination for a 100-grain 6mm at typical hunting ranges. The strength of the Partition is terminal performance on game rather than extreme long-range flatness.







Reviews
There are no reviews yet.