Description
The Nosler Partition has been the measuring stick for premium hunting bullets since 1948, and this 7mm 160 grain Spitzer is one of the most proven loads in the lineup. It's a component bullet for handloaders, sporting a .284 diameter, a flat base, and a pointed Spitzer profile that gives you a clean balance of trajectory and terminal punch. The 160 grain weight carries a G1 ballistic coefficient of 0.475 and a sectional density of 0.283, which is a big part of why it digs deep on heavy-boned game.
What Makes the 7mm 160gr Partition Tick
The whole thing starts with a fully tapered copper-alloy jacket. On impact it ruptures right at the thin jacket mouth and curls uniformly outward, so you get fast, reliable expansion whether you're hitting at magnum velocity up close or at lower speeds way out there. Behind that front core sits Nosler's integral partition, a wall of jacket material that supports the mushroom and protects the rear lead core. That back half stays locked in and keeps more than two-thirds of the original bullet weight for straight-line penetration.
Where the 160 Grain Partition Earns Its Keep
This is a classic elk and big game bullet, and it has a long track record to back it up. It's a favorite in the 7mm Rem Mag, 280 Rem, 280 Ackley, 7mm STW and similar cases, where plenty of hunters have stacked up one-shot kills on elk and moose over the decades. The 160 grain weight gives you more sectional density than the lighter 140s and 150s, which shooters tend to appreciate when a bull turns and offers up the offside shoulder. Deer, bear, and tougher plains game are all well within its range too.
Loading Up the 7mm Partition
Every bullet is visually inspected at the factory and the box stays sealed until you crack it open. There's no cannelure on this one, so you'll seat to your rifle's throat and work your powder charge for best accuracy. Many handloaders run the 160 in the 2,800 to 3,000 fps range out of standard magnums, and it tends to settle into a rifle nicely once you find the node it likes.
Key Specifications
- Manufacturer: Nosler
- Model: Partition
- Manufacturer Part Number: 16327
- UPC: 054041163279
- Caliber: 7mm (.284)
- Bullet Diameter: 0.284 in
- Bullet Weight: 160 Grain
- Bullet Profile: Spitzer
- Bullet Base: Flat Base
- Bullet Type: Partition (dual-core)
- Ballistic Coefficient (G1): 0.475
- Sectional Density: 0.283
- Overall Length: 1.270 in
- Cannelure: No
- Lead Free: No
- Quantity: 50 per box
What’s Included
- 50 Nosler Partition 7mm (.284) 160 grain Spitzer bullets
Frequently Asked Questions
Is the Nosler Partition 7mm 160gr loaded ammunition or a component bullet?
These are component bullets meant for handloading, not loaded ammo. You'll need your own brass, primers, and powder to assemble finished cartridges. The box contains 50 projectiles ready to seat in your 7mm cases.
What game is the 160 grain 7mm Partition best suited for?
It's a go-to choice for elk and other big game, and it has decades of field use behind it in cartridges like the 7mm Rem Mag, 280 Rem, and 280 Ackley. The heavier 160 grain weight and strong sectional density make it a solid pick when deep penetration on heavy-boned animals matters. It handles deer, bear, and tougher plains game just as well.
Does this Partition bullet have a cannelure for crimping?
No, this 160 grain Partition does not have a cannelure or crimp groove. You'll seat it to your rifle's throat and dial in your charge for best accuracy. Most handloaders don't crimp bolt-action hunting loads anyway, so that's not usually a drawback.
How does the Partition design hold together on impact?
The fully tapered copper-alloy jacket expands fast up front while Nosler's integral partition acts as a wall protecting the rear lead core. That back core stays intact and retains more than two-thirds of the bullet's original weight, which drives straight-line penetration. It's the reason the Partition built its reputation for consistent performance across a wide range of impact velocities.








Reviews
There are no reviews yet.