Description
Nosler built its whole reputation on the Partition, and this .25 caliber 115-grain Spitzer is a benchmark it has earned since 1948. If you load your own for a .25-06, .257 Roberts, .257 Weatherby, or just about any other .257 bore, this is the bullet handloaders reach for when the hunt matters and they want performance they can count on at the moment of truth.
The magic is in the dual-core construction. The fully tapered copper jacket ruptures right at the thin mouth on impact, while the gradual thickening along the shank controls how the front core peels back. That integral wall of jacket material, the partition itself, splits the two lead cores and keeps the rear core locked in place. The front half mushrooms wide for a big wound channel, and the protected rear core drives deep, holding onto more than half the original bullet weight. A special crimp locks that rear section in to resist deformation, even under the pressure of hot magnum loads.
Why the .25 Cal 115gr Partition Earns Its Keep
The 115-grain weight is a sweet spot for the quarter-bore. It carries a .389 G1 ballistic coefficient and a .249 sectional density, giving you flat-shooting trajectory with enough bullet behind it to punch through bone and reach the vitals on deer, antelope, and similar medium to large game. The Spitzer profile with a flat base keeps things accurate downrange and feeds reliably through the press.
Loading the Nosler Partition .257
These measure .257 inches in diameter with no cannelure, so you have the freedom to set your seating depth where your rifle likes it best. Nosler lists a minimum impact velocity of around 1,800 fps for reliable expansion, with no real ceiling on the top end, which makes the Partition at home in everything from a mild Roberts load to a screaming Weatherby. Every box is hand inspected before packaging, so you are starting with a component that holds Nosler's quality standard shot to shot. This is a 50-count box of component bullets, not loaded ammunition.
Key Specifications
- Manufacturer: Nosler
- Manufacturer Part Number: 16318
- UPC: 054041163187
- Caliber: .25 Caliber
- Bullet Diameter: 0.257 in
- Bullet Weight: 115 Grains
- Bullet Profile: Spitzer
- Bullet Type: Partition
- Bullet Base: Flat
- Overall Length: 1.145 in
- Ballistic Coefficient (G1): 0.389
- Sectional Density: 0.249
- Jacket Material: Copper
- Core Material: Lead
- Cannelure: No
- Quantity: 50 Per Box
What’s Included
- 50 Nosler Partition .25 Caliber 115gr Spitzer component bullets
Frequently Asked Questions
What cartridges can I load these Nosler Partition .25 Cal bullets in?
Any .257 diameter cartridge will take these. Popular choices include the .25-06 Remington, .257 Roberts, .250 Savage, and .257 Weatherby Magnum. The 115-grain weight is a well-rounded pick for medium to large game across that whole family of quarter-bores.
Do the .25 Cal 115gr Partition bullets have a cannelure?
No, these bullets do not have a cannelure or crimping groove. That gives you flexibility to set your seating depth wherever your particular rifle shoots best. For bolt guns where you are not roll crimping, that freedom is a real advantage when working up a load.
What makes the Nosler Partition different from a standard cup-and-core bullet?
The Partition uses a dual-core design with a wall of jacket material, the partition, separating the front and rear lead cores. The front core mushrooms wide for a big wound channel while the protected rear core stays intact for deep penetration. It holds onto more than half its original weight, which is why hunters have trusted it for decades.
Is this loaded ammunition or just the bullets?
This is a box of 50 component bullets for reloading only, not loaded ammunition. You will need your own brass, primers, and powder to assemble a finished cartridge. These are meant for handloaders building their own rounds.




Reviews
There are no reviews yet.