Description
Every percussion muzzleloader lives and dies by its nipple. That little cone is what channels the flame from your cap down to the main charge, and once the fire hole erodes or fouls up, you start chasing hangfires and misfires that have nothing to do with your powder or your caps. This 2-pack of Traditions stainless steel nipples is the fix, cut for M6x1 threads and sized for No. 11 percussion caps so they drop right into compatible Traditions rifles and pistols.
Where These Traditions #11 Nipples Fit
These are a direct replacement for Traditions sidelock muzzleloaders and black powder pistols running the M6x1 metric thread and No. 11 caps. Plenty of folks with older Hawken-style guns and single-shot pistols reach for these when it's time to freshen things up. Worth noting: they are not made for the Traditions Thunder Dome breech plug, so if that's your setup, you'll want a different part. If you're unsure what thread your gun uses, pull your old nipple with a nipple wrench and check before ordering.
Why Stainless Steel Earns Its Keep
Stainless holds up well against the corrosive residue black powder and Pyrodex leave behind, which matters on a part that takes a beating every time the hammer drops. The stainless finish shrugs off the moisture and fouling that pit cheaper nipples, and it cleans up easy at the end of a range day.
Buy Them Before You Need Them
Most experienced hands change their nipple about once a year on a gun that sees regular use, and sooner if you shoot heavy charges that erode the fire hole faster. A lot of the seasoned crowd keeps a spare or two in the range box for exactly that reason, which is why these come as a pair. Keep the fire hole clear, seat your caps fully, and a fresh nipple will keep ignition fast and consistent shot after shot.
Key Specifications
- Manufacturer: Traditions
- Manufacturer Part Number: A1250
- UPC: 040589125008
- Model: Nipple
- Cap Size: #11 Percussion
- Thread: M6x1 (Metric)
- Material: Stainless Steel
- Color: Silver
- Length: 5.65 mm
- Quantity: 2 Pack
- Compatibility: Traditions rifles and pistols; not for Thunder Dome breech plug
What’s Included
- 2 Traditions stainless steel #11 percussion nipples (M6x1 thread)
Frequently Asked Questions
What guns do these Traditions #11 nipples fit?
They fit Traditions muzzleloading rifles and pistols that use M6x1 metric threads and No. 11 percussion caps. This covers a lot of Traditions sidelocks and single-shot pistols. They are not intended for the Traditions Thunder Dome breech plug, so check your setup first. If you're not certain of your thread size, back out your current nipple with a wrench and compare.
How often should I replace a percussion nipple?
A common rule of thumb is once a year on a gun that gets regular use, and more often if you shoot heavy charges that erode the fire hole faster. If you start getting frequent misfires or your groups open up, the nipple is usually a good first suspect. That's exactly why these come in a 2-pack, so you've got a spare ready when the time comes.
Will these work on a CVA muzzleloader?
CVA doesn't officially list Traditions parts as compatible, but the M6x1 threading is the same and shooters have reported these threading in fine on some CVA guns. Fit can vary, so it's worth verifying the thread on your specific model before you rely on it. When in doubt, check with the manufacturer of your firearm.
Do I need a special tool to install these nipples?
Yes, a nipple wrench makes removal and installation quick and keeps you from rounding off the flats. It's a cheap tool that belongs in every percussion shooter's kit. Give the threads a light coat of anti-seize or grease before installing to prevent the new nipple from rusting in place.





Reviews
There are no reviews yet.