Traditions Accelerator Breech Plug with 209 Primer Holder, Steel

Description

The Traditions Accelerator Breech Plug is one of those parts you don't think about until you need it, and when you do, this is the one that makes life at the range and in the field a whole lot easier. The standout feature is the knurled head that lets you remove the plug with your fingers in just three full rotations. No wrench, no fumbling around in cold weather with frozen hands, just twist it out and get to cleaning.

Inside, it packs a built-in 209 primer holder and a flat-face design paired with a heavy-duty O-ring. That combination gives you dependable ignition and helps cut down on blow back, which keeps your action cleaner and your shots more consistent. It's built from steel with a silver finish and measures right around 4.2 inches, so it holds up to the heat and pressure of repeated firing.

What the Accelerator Breech Plug Feeds On

This plug plays nice with the powders most inline hunters actually run. It works well with Blackhorn 209, Pyrodex Pellets, and loose powder, so you've got flexibility depending on your load and your rifle. Whether you're sighting in before the season or topping off between shots on a hunt, the tool-free design means faster maintenance and less time messing with hardware.

Which Rifles the Accelerator Plug Fits

This is a direct-fit replacement for Traditions Accelerator-series muzzleloaders, including the Pursuit II, Pursuit Ultralight, Pursuit XT, Vortek, Vortek Ultralight, Vortek StrikerFire, Buckstalker, and Buckstalker XT. One thing worth knowing before you order: it is not interchangeable with Northwest Accelerator models, and it won't swap the ignition style on your gun. It's also not made for bolt-action, plunger-style, or any non-Accelerator rifles. If you're running one of the models listed above, this is the drop-in part you're after, and it makes a smart backup to keep in your kit.