Description
If you've been chasing more consistent 9mm handloads, bullet seating is one of the easiest places to tighten things up, and the Lyman Pro Micrometer Seating Die makes that part almost effortless. Instead of guessing with a lock ring and a wrench, you set your overall length with the micrometer head up top and lock it in. Want to bump your seating depth a few thousandths one way or the other? Just turn the dial to the setting you need and keep loading. It's a repeatable, no-drama way to get the same result round after round.
What the Lyman Pro Micrometer Seating Die Brings to the Bench
The real workhorse here is the floating bullet seating punch. It centers the bullet on the case as the round comes up, which cuts down on the run-out that throws off concentricity and accuracy. For a round like 9mm that a lot of folks load in big batches, that kind of self-centering help goes a long way toward keeping your ammo uniform without babysitting every single case.
Built to Last in the 9mm Pro Micrometer Seating Die
Lyman machined this die from corrosion-resistant stainless steel, so it shrugs off rust and keeps its clean look even after years on a loading bench or in a humid garage shop. It's cut with the standard 7/8"-14 thread, which means it drops right into just about any common single-stage or turret press you're already running. No adapters, no fuss.
Fitting the 9mm Luger Seating Die Into Your Load Process
This is a dedicated seating die, so you'll pair it with your sizing and crimp steps to round out your 9mm Luger process. The micrometer head shines when you're switching between bullet weights or profiles, since you can note your settings and come right back to them later. For anyone who values precision and wants to stop fiddling with seating adjustments every time they change a load, this die earns its spot in the toolbox.
Key Specifications
- Manufacturer: Lyman
- Manufacturer Part Number: 7704354
- UPC: 011516743541
- Caliber: 9mm Luger
- Die Type: Bullet Seating Die
- Adjustment: Micrometer-adjustable seating head
- Seating Punch: Floating, self-centering
- Material: Corrosion-resistant stainless steel
- Thread: 7/8"-14 standard
- Quantity: 1 die
- Shipping Weight: 0.89 lb
What’s Included
- Lyman Pro Micrometer Seating Die, 9mm Luger (1)
Frequently Asked Questions
Does the Lyman Pro Micrometer Seating Die fit standard reloading presses?
Yes. It uses the standard 7/8"-14 thread, so it threads directly into most common single-stage and turret presses without any adapters. If your press takes typical dies, this one will drop right in.
Is this a complete die set or just the seating die?
This is a single bullet seating die, not a full set. You'll still need a sizing die and your preferred crimp step to complete your 9mm Luger load process. Lyman offers a matching Pro Series Micrometer Taper Crimp Die in 9mm if you want to round things out.
How does the micrometer head actually help?
The micrometer-adjustable head lets you set bullet seating length to fine tolerances and dial changes in small, repeatable increments. If you want to adjust seating depth a few thousandths of an inch, you just turn the head to the setting you need. It makes returning to a known load much faster when you switch bullets.
What does the floating seating punch do for my ammo?
The floating punch centers the bullet on the case as the round is seated, which helps reduce run-out and keep your rounds concentric. For high-volume 9mm loading, that self-centering action helps your ammo come out more uniform without extra effort on your end.



Reviews
There are no reviews yet.