0
0

Lyman Rifle 2 Piece Die Set .308 Win/.307 Win – MPN 7452298

UPC: 011516722980

$50.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lyman Rifle 2 Piece Die Set covers two of the most popular rifle cartridges around, giving .308 Winchester and .307 Winchester reloaders the two dies they need to get rolling. You get a full-length sizing die with a one-piece decapping unit that handles neck sizing and primer removal in a single pass, plus a bullet seating die with a built-in roll crimp. For anyone loading jacketed bullets in bottleneck brass, this is the straightforward setup that gets the job done without extra complication.

What Sets the Lyman .308/.307 Die Set Apart

Lyman builds these dies on state-of-the-art computer-controlled equipment, so each one comes out perfectly dimensioned batch after batch. The sizing die is vented to keep trapped air from denting your case shoulders, then it's polished, heat treated for toughness, and given a final micro-finish polish so cases glide in and out smooth. That smoothness matters when you're running a few hundred pieces of brass in a sitting, and it helps keep sizing effort low and case life long.

Fitting the Lyman 2 Die Set to Your Press

The dies use the industry-standard 7/8"-14 thread, so they'll thread right into just about any single-stage or turret press out there, including RCBS, Lee, Hornady, Redding, and Dillon. Everything stows in a plastic storage case that keeps the dies and seating stem organized and protected between loading sessions. The seating die ships with a stem shaped for pointed bullets, which suits most common .308 and .307 hunting and target projectiles.

Keep in mind the shellholder is sold separately, so grab the correct one for the .308/.307 case head if you don't already have it in your kit. If you plan on running cast bullets, Lyman recommends adding a separate neck expanding die to open the case mouth for a smoother seat. For loading jacketed bullets, this two-die set has you covered right out of the box.

Key Specifications

  • Caliber: .308 Winchester / .307 Winchester
  • Set Type: 2 Die Set (Full Length Sizing + Bullet Seating)
  • Die Material: Steel
  • Thread Size: 7/8"-14 (fits all popular presses)
  • Sizing Die: Full Length with one-piece decapping unit
  • Seating Die: Bullet seating die with roll crimp
  • Seating Stem: Shaped for pointed bullets
  • Finish: Vented, polished, heat treated, micro-finish polished
  • Shellholder: Sold separately
  • Country of Origin: United States
  • Manufacturer: Lyman
  • Manufacturer Part Number: 7452298
  • UPC: 011516722980
  • Shipping Weight: 1.28 lbs

What’s Included

  • Full Length Sizing Die with one-piece decapping unit
  • Bullet Seating Die with roll crimp
  • Seating stem for pointed bullets
  • Plastic storage case

Frequently Asked Questions

Does the Lyman .308/.307 die set come with a shellholder?

No, the shellholder is sold separately. You'll want to pick up the correct shellholder for the .308/.307 Winchester case head if you don't already have one on your bench. The dies themselves are fully included and ready to run.

Will these dies work on my press?

Yes, they use the standard 7/8"-14 thread that fits the vast majority of reloading presses, including RCBS, Lee, Hornady, Redding, and Dillon. If you have a common single-stage or turret press, they'll thread right in with no adapter needed.

Can I use this set for loading cast bullets?

This two-die set is set up for jacketed bullets in bottleneck brass. For cast bullets, Lyman recommends adding a separate neck expanding die to open the case mouth so the softer bullet seats cleanly without shaving lead. The sizing and seating dies in this set still handle the rest of the job.

Does the Lyman 2 die set work for both .308 and .307 Winchester?

Yes, the same set handles both .308 Winchester and .307 Winchester since they share the same case dimensions. One purchase covers you for either cartridge, which is handy if you load both.

Additional information

UPC

011516722980

Manufacturer

Manufacturer Part Number

7452298

Shipping Weight

1.2813

Reviews

There are no reviews yet.

Be the first to review “Lyman Rifle 2 Piece Die Set .308 Win/.307 Win – MPN 7452298”