Description
If you're loading your own .243 Winchester for deer season, varmint work, or just squeezing better groups out of your rifle, this Lyman 2-die set covers the two jobs that matter most. It pairs a full-length resizing die with a bullet seating die, giving you everything needed to turn fired brass back into fresh, ready-to-shoot ammo. Lyman has been building reloading gear for a long time, and these dies are machined on computer-controlled equipment so the dimensions come out right every time.
What the .243 Win. Die Set Handles
The full-length sizing die resizes the whole case body back to spec and includes a decapping stem to punch the spent primer, plus a neck expanding button to open the case mouth for the next bullet. One nice touch is that the sizing die is vented, which lets trapped air escape instead of getting pinched inside and denting your cases. Each sizer is polished, heat treated for toughness, then given a final micro-finish polish so brass slides in and out smooth.
Seating and Crimping Your .243 Loads
The seating die comes set up with a stem shaped for pointed bullets, which is what most .243 shooters are running whether it's spitzer hunting bullets or boat-tail match projectiles. It also has a roll crimp built in, so you can lock bullets into the case neck when your load calls for it. Both dies use the industry-standard 7/8 inch by 14 threads, so they drop straight into RCBS, Hornady, Lee, Dillon, Redding, and just about any other common single stage or progressive press.
These sets are aimed squarely at jacketed bullets in the bottlenecked .243 case. If you plan on running cast bullets, Lyman makes a separate neck expanding die worth adding. Keep in mind a shell holder is sold separately, so grab the correct one if you don't already have it in your kit.
Key Specifications
- Caliber: .243 Winchester
- Set Type: 2-Die Rifle Set
- Dies Included: Full Length Sizing Die, Bullet Seating Die
- Sizing Die: Full length with one-piece decapping unit and neck expanding button, vented
- Seating Die: Bullet seating die with roll crimp
- Seating Stem: Configured for pointed bullets
- Thread Size: 7/8 inch – 14 (fits all popular presses)
- Material: Steel, heat treated and polished
- Bullet Type: Jacketed bullets in bottlenecked rifle cases
- Manufacturer: Lyman
- Manufacturer Part Number: 7452283
- UPC: 011516722836
- Country of Origin: United States
What’s Included
- Full length resizing die (with decapping stem and neck expanding button)
- Bullet seating die (with roll crimp and pointed-bullet seating stem)
- Plastic storage case
Frequently Asked Questions
Do I need a shell holder to use the Lyman .243 Win die set?
Yes, the shell holder is sold separately and is not included with this 2-die set. You'll want the correct shell holder sized for the .243 Winchester case head before you start loading. If you already reload other cartridges that share the same case head diameter, an existing shell holder may work.
Will these Lyman dies fit my press?
They use standard 7/8 inch by 14 threads, so they thread into just about every popular reloading press on the market. That includes RCBS, Hornady, Lee, Dillon, Redding, and others. Whether you're running a single stage or a progressive, these dies will seat right in.
Can I load cast bullets with this .243 Winchester die set?
This set is built specifically for jacketed bullets in the bottlenecked .243 case. If you want to load cast bullets, Lyman recommends adding a separate neck expanding die, which is sold on its own. For standard jacketed loads, the included dies handle everything you need.
Does the seating die work with pointed bullets?
It does. The seating die ships with a stem configured for pointed bullets, which covers the spitzer and boat-tail projectiles most .243 shooters load for hunting and target work. It also includes a roll crimp if your load calls for crimping the bullet into the case neck.




Reviews
There are no reviews yet.