0
0

Lyman Neck Expanding (M) Die .223/.22-250 / .222 Rem

UPC: 011516720979

$28.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lyman Neck Expanding (M) Die takes a smarter approach to prepping your case necks for seating. Instead of just dragging an expander button through the neck and stretching the brass, the M Die uses a stepped expander plug that works in two stages. The first step opens the inside of the neck to just under bullet diameter for consistent neck tension, and the second step opens the very mouth of the case to bullet diameter or a touch over. That little bit of relief at the mouth lets the bullet start perfectly centered and aligned with the axis of the neck, which is where a lot of runout problems get solved before they ever happen.

What the Lyman M Die Does Differently

Most standard expander setups pull the brass around a button and can stretch the case in the process. The M Die doesn't work the brass the same way, so you get cleaner necks and longer case life out of the deal. The stepped plug also keeps the flare self-limiting, meaning it won't balloon the mouth out just because one case is slightly longer than the next. Reloaders who chase tight, repeatable neck tension tend to reach for this die for exactly that reason.

A Must-Have for Cast and Flat-Base Bullet Loaders

If you shoot cast or flat-base bullets, this one earns its spot on the bench fast. By running the expanding plug down a little deeper, that second step puts a slight flare on the case mouth so a soft lead bullet slides in without shaving any metal off the edge. Jacketed bullet loaders benefit too, since starting the bullet square in the neck makes for straighter ammo and more consistent groups downrange.

Fits Your Press Right Out of the Box

This die is cut for .222 Remington, .222 Remington Magnum, .223 Remington, and .22-250 Remington, so one tool covers a nice spread of the .22 centerfire family. It uses the industry standard 7/8 x 14 threads, which means it drops right into popular presses from RCBS, Lee, Hornady, Dillon, Redding, and more without any fuss.

Key Specifications

  • Manufacturer: Lyman
  • Model: Neck Expanding (M) Die
  • Manufacturer Part Number: 7342097
  • UPC: 011516720979
  • Die Type: Two-Step Neck-Expanding (M) Die
  • Cartridges: .222 Rem, .222 Rem Magnum, .223 Rem, .22-250 Rem
  • Thread Size: 7/8 x 14
  • Material: Steel
  • Press Compatibility: Fits standard presses including RCBS, Lee, Hornady, Dillon, Redding
  • Country of Origin: United States
  • Shipping Weight: 0.3188 lb

What’s Included

  • Lyman Neck Expanding (M) Die
  • Two-step expander plug
  • Plastic storage case

Frequently Asked Questions

What cartridges does the Lyman M Die .223/.22-250 cover?

This die is set up for .222 Remington, .222 Remington Magnum, .223 Remington, and .22-250 Remington. That makes it a handy single tool for a good chunk of the .22 centerfire lineup. One die handles the whole group, so you're not buying separate pieces for each one.

How is the Lyman Neck Expanding M Die different from a standard expander button?

A standard expander button pulls through the neck and can stretch the brass in the process. The M Die uses a stepped plug that expands the inside of the neck to just under bullet diameter, then opens the mouth to bullet diameter or slightly over. That approach helps extend case life and starts the bullet perfectly centered for straighter ammo.

Is this die worth it for cast bullets?

Many consider it close to essential for cast and flat-base bullet loads. Running the plug down a little deeper puts a slight flare on the case mouth, which lets a soft lead bullet enter without shaving metal off the edge. The self-limiting step also keeps you from over-working the brass with too much flare.

Will the Lyman M Die fit my press?

Yes, it uses the industry standard 7/8 x 14 thread, so it threads right into the common single-stage and progressive presses on the market. That covers brands like RCBS, Lee, Hornady, Dillon, and Redding. No adapters or special hardware needed.

Additional information

UPC

011516720979

Manufacturer

Manufacturer Part Number

7342097

Shipping Weight

0.3188

Reviews

There are no reviews yet.

Be the first to review “Lyman Neck Expanding (M) Die .223/.22-250 / .222 Rem”