Description
The GForce Arms RPX9 Exodus is a striker-fired 9mm pistol built on a polymer frame with a 4140 steel slide finished in a sharp two-tone QPQ Black and Flat Dark Earth combination. At 7.3 inches overall with a 4.02-inch barrel and just over 21 ounces unloaded, it sits squarely in Glock 19 territory, and that's very much intentional. It's manufactured by Radikal Arms and imported by GForce Arms, which is based out of Reno, Nevada. The result is a pistol that covers a lot of ground for a lot of people without demanding a premium price.
What Makes the RPX9 Exodus Worth a Closer Look
One of the biggest selling points here is Glock Gen 3 and Gen 4 G19 parts and magazine compatibility. That means an enormous aftermarket ecosystem is already open to you right out of the box. Want to swap in a different trigger, upgrade the sights, or just grab a few extra mags from your local shop? Easy. The accessory rail on the dustcover is a standard M1913 Picatinny setup, so lights and lasers mount right up without any fuss. Front and rear slide serrations make racking the slide intuitive from multiple grip positions, and the flared magwell keeps reloads fast and clean. Safety-wise, the Exodus runs a trigger blade safety and a firing pin safety, plus a loaded chamber indicator built into the extractor so you always know what's in the gun.
RPX9 EXO FDE: Break-In, Trigger Feel, and Real-World Performance
The fiber optic sights on this pistol are genuinely bright and easy to track, and several reviewers have noted they're larger and more visible than what you'd find on a standard Glock. GForce Arms does recommend a break-in period of around 150 heavier-loaded rounds, and that's good advice worth following with any new pistol. Early trigger pull can feel a bit stiff right off the bat, but it smooths out with use, and if you want to accelerate that process, the Glock compatibility means aftermarket triggers drop right in. Once it's been run properly, the gun handles a wide range of 9mm loads well and shoots accurately. Keep it lubricated, especially early on, and it'll reward you for it.
GForce Arms backs the RPX9 Exodus with a 5-year limited warranty, which is a meaningful commitment for a pistol in this price range. It ships with two magazines, and the aggressive grip stippling on the frame gives you a solid, secure hold whether you're at the range or carrying it on your hip.
Key Specifications
- Manufacturer: GForce Arms
- Model: RPX9 Exodus
- MPN: GFRPX3C9FDE
- UPC: 643477865767
- Caliber: 9mm Luger
- Action: Striker-Fired Semi-Auto
- Barrel Length: 4.02 inches
- Overall Length: 7.3 inches
- Height: 5.25 inches
- Width: 1.5 inches
- Weight (Unloaded): 21.28 oz
- Capacity: 15+1
- Slide Material: 4140 Steel
- Frame Material: Polymer
- Finish: QPQ Black Slide / Flat Dark Earth Frame
- Sights: Glock Fiber Optic Front and Rear
- Safety: Trigger Blade Safety, Firing Pin Safety, Loaded Chamber Indicator
- Rail: M1913 Picatinny
- Magazine Compatibility: Glock Gen 3 and Gen 4 G19
- Warranty: 5-Year Limited
What’s Included
- GForce Arms RPX9 Exodus pistol
- 2 x 15-round magazines (or 10-round where required)
Frequently Asked Questions
Is the GForce Arms RPX9 Exodus compatible with standard Glock 19 magazines?
Yes, the RPX9 Exodus is designed to work with Gen 3 and Gen 4 Glock 19 magazines. Some users have noted that a short break-in period with the included magazines helps ensure proper seating and lockup before using third-party mags. Running a few load-and-eject cycles typically resolves any initial fitment tightness.
Does the RPX9 EXO come with a rail for a light or laser?
It does. The RPX9 Exodus has a standard M1913 Picatinny rail on the dustcover of the frame, which is compatible with most common weapon lights and lasers. It is not optics-ready for a red dot sight on the slide in this base configuration, so a rail-mounted laser or light is the way to go if you want to add accessories.
What kind of break-in does the RPX9 Exodus require?
GForce Arms officially recommends a break-in of approximately 150 heavier-loaded rounds before expecting peak performance. The trigger and slide action will feel noticeably smoother after the break-in period. Keeping the pistol properly lubricated during and after break-in goes a long way toward reliable function.
Can I use aftermarket Glock parts to customize the RPX9 Exodus?
That's actually one of the strongest selling points of this pistol. The RPX9 Exodus is built with Glock Gen 3 and Gen 4 G19 compatibility in mind, which means a wide range of aftermarket triggers, guide rods, and other components are available for it. If you want to upgrade the trigger feel right away, Glock-compatible drop-in triggers will work.
How does the two-tone FDE finish hold up?
The FDE version features a QPQ Black finish on the 4140 steel slide with the Flat Dark Earth color on the polymer frame. The QPQ process is a corrosion-resistant surface treatment, similar to what's used on many quality production pistols. Normal care and occasional cleaning should keep both the slide and frame looking solid for years of regular use.
What is the trigger pull weight on the GForce Arms RPX9 Exodus?
Trigger pull averages around 5 to 5.5 pounds on a broken-in example, which is in line with a standard Glock-style trigger. Out of the box the trigger can feel a bit heavier and grittier until it loosens up, but it settles in nicely after the recommended break-in period. The reset is short and audible, which makes it easy to shoot comfortably.




Reviews
There are no reviews yet.