Description
There is a lot to like about a 9mm AR pistol that runs on Glock-pattern magazines, and the Freedom Ordnance FX-9P4 leans into that idea hard. Built around billet machined aluminum upper and lower receivers that are a full inch shorter than a standard AR-15 set, this thing trims size and weight where it counts while keeping the controls you already know. The safety selector, magazine release, and last round bolt hold open all work the way an AR should, so there is no relearning curve when you pick it up.
What Sets the FX-9P4 Apart
The 4.45 inch barrel is nitride-treated 4150 chromoly steel with a 1:10 twist, capped with a fluted muzzle enhancer on standard 1/2×28 threads, which means swapping on a 9mm-rated muzzle device or suppressor is a five minute job. Freedom Ordnance also gave this version some worthwhile upgrades over earlier models, including an oversized Recurve charging handle, a custom hand stop shaped specifically for the FX-9, anti-walk pins, and a fully heat treated and nitrided bolt, extractor, and ejector package. The blowback action is simple and stout, and the free-float M-LOK handguard plus full-length Picatinny top rail leave you plenty of room for a red dot, light, or whatever else your setup calls for. The KAK Shockwave blade comes installed from the factory.
Feeding the FX-9 9mm Pistol
An ETS 31-round Glock-style magazine ships in the box, and the gun happily runs the same pattern mags many folks already have stacked in a drawer at home. At 18.5 inches overall and 4.45 pounds, it makes a handy truck gun, home setup, or just a seriously fun range companion that eats affordable 9mm all afternoon. Made in the USA and built to take most AR-15 accessories, the FX-9P4 gives you a modular platform you can keep tweaking for years. Just plan on adding an optic, since it ships without sights, and the top rail is ready when you are.
Key Specifications
- Manufacturer: Freedom Ordnance
- Model: FX-9 Pistol
- MPN: FX-9P4
- UPC: 856169007066
- Caliber: 9mm Luger
- Action: Semi-Auto, Blowback
- Capacity: 31+1
- Magazine Compatibility: Glock-pattern 9mm magazines
- Barrel: 4.45" nitride 4150 chromoly steel, 1:10 twist
- Muzzle: Fluted muzzle enhancer, 1/2×28 TPI threads
- Receivers: Billet machined aluminum, hardcoat anodized
- Handguard: 3.5" Freedom M-LOK free-float with hand stop
- Brace: KAK Shockwave blade stabilizer
- Sights: None, optic ready Picatinny top rail
- Overall Length: 18.5"
- Weight: 4.45 lbs
What’s Included
- Freedom Ordnance FX-9P4 9mm pistol
- One ETS 31-round Glock-style magazine
- KAK Shockwave brace (installed)
- Custom FX-9 hand stop (installed)
Frequently Asked Questions
What magazines does the Freedom Ordnance FX-9P4 accept?
The FX-9P4 runs Glock-pattern 9mm magazines, and it ships with one ETS 31-round mag in the box. That means factory Glock mags, ETS, Magpul PMAG Glock-style mags, and most other quality Glock-pattern options will feed it. The last round bolt hold open functions with these mags too, which is a nice touch for an AR9.
Does the FX-9 pistol come with sights or an optic?
No, this model ships optic ready with no sights installed. The full-length Picatinny top rail gives you plenty of real estate for a red dot, backup irons, or a magnified optic if that is your thing. A compact red dot is the most popular route on a pistol this size.
Can I run a suppressor on the FX-9P4?
Yes. The barrel is threaded 1/2×28 and the fluted muzzle enhancer comes off to make room for 9mm-rated muzzle devices and suppressors. Since it is a direct blowback 9mm, it pairs really well with a can, just expect a bit more gas than a delayed system.
Is there ammo the FX-9 does not like?
Freedom Ordnance specifically advises against aluminum-cased ammunition in the FX-9. Standard brass-cased 115 grain and 124 grain loads are the sweet spot, and owners report it runs common range ammo without fuss. As with any blowback 9mm, quality FMJ is the way to break it in.




Reviews
There are no reviews yet.