Description
Gas blowback is the number one gripe about running a can on a direct impingement AR, and the Dead Air CT5P Patrol was built from the ground up to fix it. This is the first release in Dead Air's Defense line, a gas-regulated 5.56 NATO and 6mm ARC suppressor that pairs the patent-pending Compact Triskelion baffle stack with Dead Air's Gas Management System. The result is a claimed backpressure increase of only around 2 to 3 percent over unsuppressed fire, which means your bolt velocity stays close to stock on both DI and piston guns and you are not eating gas with every shot.
Built Tough, Kept Light: Inside the CT5P Patrol
Dead Air 3D prints the CT5P from Haynes 282 superalloy, the same class of material used in jet engine hot sections. That construction earns it a full-auto rating with no minimum barrel length restriction, and it has been tested to the SOCOM SURG standard, which is about as punishing as suppressor qualification gets. Despite that durability, this Xeno version stays under a pound, and the textured exterior does double duty by shedding heat faster and cutting down on light reflection. Flash and spark are knocked down to near invisible levels even on barrels as short as 10.5 inches, which is exactly where short duty guns tend to throw the biggest fireballs.
Xeno Quick-Detach Convenience in FDE
This configuration ships with Dead Air's Xeno mounting system in a 1/2×28 thread, so you can pull the can off in seconds or move it between hosts without re-zeroing headaches. By skipping a HUB interface, Dead Air trimmed length and weight while keeping point of impact shift minimal, and the Flat Dark Earth high-temp Cerakote finish holds up to hard use while looking right at home on a tan or camo build. Whether you are outfitting a patrol rifle, a home defense carbine, or a short-barreled range gun that has been gassing you out, the CT5P Patrol is one of the most purpose-driven 5.56 cans on the market right now.
Key Specifications
- Model: CT5P Patrol
- Manufacturer: Dead Air Silencers
- MPN: CT5PXNFDE
- UPC: 810128163880
- Caliber Rating: 5.56 NATO / 6mm ARC
- Mount Type: Xeno Quick Detach
- Thread Pitch: 1/2×28
- Length: 5.89 in
- Diameter: 1.6 in
- Material: Additive-manufactured Haynes 282 superalloy
- Finish: Flat Dark Earth High-Temp Cerakote
- Baffle Design: Compact Triskelion with Gas Management System
- Full-Auto Rated: Yes
- Minimum Barrel Length: None
- Energy Rating: 2,200+ ft-lbs
What’s Included
- Dead Air CT5P Patrol suppressor
- Xeno mounting system (1/2×28)
Frequently Asked Questions
Will the CT5P Patrol work on my direct impingement AR-15 without gassing me out?
That is exactly what it was designed for. The Compact Triskelion baffles and Gas Management System keep backpressure increase to roughly 2 to 3 percent over unsuppressed fire, so bolt velocity stays close to stock on both DI and piston guns. Gas to the face and toxic fume exposure are dramatically lower than with traditional baffle designs.
Is the Dead Air CT5P Patrol full-auto rated, and does it have a barrel length restriction?
Yes, it is full-auto rated for both 5.56 NATO and 6mm ARC with no minimum barrel length restriction. It has been tested to the SOCOM SURG standard, one of the toughest suppressor endurance protocols out there. That makes it a solid fit for short-barreled rifles right down to 10.5 inch guns.
Is the CT5P Patrol HUB compatible?
No, Dead Air intentionally skipped the HUB interface to shave length and weight and keep point of impact shift minimal. This version uses Dead Air's Xeno quick-detach mounting system with a 1/2×28 thread. If you want to run it on multiple rifles, just add a Xeno muzzle device to each host and the can swaps over in seconds.
How does the CT5P differ from Dead Air's Sandman series?
The Sandman line covers larger 7.62 platforms, while the CT5P is purpose-built around the pressure and velocity profile of 5.56 NATO and 6mm ARC. It borrows lessons from the Sandman X and Lazarus 6 but goes shorter and lighter, at just 5.89 inches in this Xeno configuration. If your host is a 5.56 or 6 ARC carbine, this is the more specialized tool.


Reviews
There are no reviews yet.