0
0

Harris Engineering #6 Bipod Adapter Stud for 3/8″ European Rails

UPC: 051156000062

$10.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Harris #6 Adapter solves a common headache for owners of rifles that came with a European-style forend rail but no easy way to hang a bipod off it. It gives you a proper HB6 swivel stud on rails measuring roughly 3/8" across the slot, which covers a lot of ground: Tikka, Sako, Blaser, Anschutz match rifles, and plenty of Savage F/TR and 12 F/T target guns run this width. Slide it into the channel, snug down the set screw, and you've got a rock-solid attachment point for any swivel-stud Harris bipod.

What the Harris #6 Adapter Actually Does

A lot of factory rail adapters skip the set screw, which means the whole thing can creep back and forth under recoil right when you want it steady. This one clamps down and holds. Folks who've run it on Anschutz and Savage target rifles point out that it kills the movement they were fighting with the plate that shipped with the gun. The stud sits low, so your bipod mounts close to the forend without adding a bunch of stack height or bulk.

Built the Way You'd Expect From Harris

Harris has been the benchmark for bipod hardware for decades, and this little piece is cut from the same cloth. It's machined steel with a matte black finish, made in the USA, and the fit and finish hold up to what people expect from the brand. There's not much to it, and that's the point. Fewer parts means fewer things to work loose in the field or on the line.

Getting the Harris #6 Mounted

Installation takes about a minute. Confirm the rifle is unloaded, slide the adapter into the 3/8" rail slot, position it where you want the bipod to sit, and tighten the set screw. Keep in mind this is the adapter only, so you'll pair it with a swivel-stud Harris bipod separately. If your rail measures closer to 5/16" instead, that's the American width and you'd want the #6A instead.

Key Specifications

  • Manufacturer: Harris Engineering
  • Manufacturer Part Number: No. 6
  • Model: HB6
  • UPC: 051156000062
  • Type: Rail-to-swivel-stud bipod adapter
  • Rail Fit: European size, approx. 3/8" across rail slot
  • Attachment: Slides into rail, locks with set screw
  • Material: Steel
  • Finish: Matte black
  • Country of Origin: Made in USA
  • Shipping Weight: 0.0625 lb

What’s Included

  • Harris #6 bipod adapter stud (adapter only, bipod sold separately)

Frequently Asked Questions

What rifles does the Harris #6 adapter fit?

It's made for European-style forend rails that measure about 3/8" across the slot. That includes rifles like Tikka, Sako, Blaser, and Anschutz match guns, plus a lot of Savage F/TR and 12 F/T target rifles. If you're not sure, measure across your rail slot before ordering.

How is the #6 adapter different from the #6A?

The difference comes down to rail width. The #6 fits European rails at roughly 3/8" across the slot, while the #6A is sized for American rails at about 5/16". Measuring your rail is the quickest way to figure out which one you need.

Does the Harris #6 adapter come with a bipod?

No, this is the adapter only. It gives your rail a swivel stud so you can mount a Harris swivel-stud bipod, but the bipod itself is sold separately. Pair it with whichever Harris model suits your setup.

Will the adapter move around under recoil?

That's the main reason people reach for this one. It locks down with a set screw, so once it's tightened in the rail it stays put instead of creeping under recoil. Owners who dealt with movement from a factory plate often mention this piece cures it.

Additional information

UPC

051156000062

Manufacturer

Manufacturer Part Number

No.6

Shipping Weight

0.0625

Reviews

There are no reviews yet.

Be the first to review “Harris Engineering #6 Bipod Adapter Stud for 3/8″ European Rails”