$239.99
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The TriggerTech Rem Model 7 Special takes one of the biggest complaints about the little Model 7, its gritty and heavy factory trigger, and puts it to bed for good. This is a drop-in single stage replacement built around TriggerTech's Frictionless Release Technology, which swaps the usual sliding sear contact for a free-rolling element. The result is a break with genuinely zero creep and very short over-travel, so the rifle fires the instant you expect it to instead of stacking up on you. Folks who have made the switch often describe it as breaking like a glass rod, and that clean release is exactly what tightens groups on a lightweight mountain rifle.
The Special is the step up from the Primary model, and the practical difference comes down to how light you can go. Where the Primary bottoms out around 1.5 pounds, the Special adjusts all the way down to 1.0 pound, giving you a range of 1.0 to 3.5 pounds. Because the break is so crisp, most people report the pull feeling about a half pound lighter than a friction-based trigger of the same measured weight. For a walk-and-stalk rifle or a light varmint setup, that extra window at the bottom end makes a real difference.
Pull weight changes happen through CLKR Technology, an externally accessible set screw that clicks in roughly one-ounce increments. Each click is a discernible detent, so you can count your adjustments and know exactly where you landed without a scale in hand. You can nudge it heavier for thick winter gloves or lighter for precision work, and it is easy enough to fine-tune once the barreled action is back in the stock.
Internally, the Special runs hardened 440C stainless steel components that resist corrosion and hold up over a long service life. Since the design does not depend on coatings, polishing, or lubrication of the key engagement surfaces to perform, the pull stays consistent from the first shot through thousands of rounds. The unit is finished in PVD black over anodized 7075 aluminum for a clean look that matches most builds. Installation is a straightforward drop-in for the right-handed Model 7 action, and the removable bolt release gives you flexibility depending on your setup.
Both use the same frictionless design and break cleanly, so the main difference is the adjustment range. The Primary bottoms out around 1.5 pounds, while the Special drops all the way to 1.0 pound and tops out at 3.5. If you want the option to run a lighter pull for precision or varmint work, the Special gives you that extra window.
Pull weight is set through an externally accessible screw using TriggerTech's CLKR system. Each click represents roughly one ounce of change, and the detents are easy to feel so you can count your adjustments. You can even fine-tune it with the barreled action in the stock, though a rough setting with the action out makes the job easier.
Yes, the Special is designed to drop straight into a right-handed Model 7 action without gunsmithing for most installs. Users regularly describe the swap as quick and painless. As with any trigger work, a function check afterward is always a good idea, and a gunsmith can handle it if you would rather not.
The rated range is 1.0 to 3.5 pounds, but pull weight is influenced by your rifle's firing pin spring, so results can vary slightly at the low end. A heavier firing pin spring can push the minimum pull up a touch. That said, the crisp zero-creep break tends to feel lighter than the measured weight would suggest.
| UPC | 885768001946 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | RM7-SBB-13-TBC |
| Shipping Weight | 0.325 |
You must be logged in to post a review.
Reviews
There are no reviews yet.