0
0

Talley Browning X-Bolt 30mm High Scope Mounts 20 MOA Burnt Bronze

UPC: 876430002842

$97.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Talley built this mount to take the guesswork out of setting up a scope on a Browning X-Bolt. Instead of a separate base and ring stacked together, each ring and its base are machined as a single piece, so there is nothing to work loose or drift out of line between the scope and the receiver. It fits the Long/Magnum action X-Bolt, holds a 30mm tube in a high ring height, and wears a Burnt Bronze finish that pairs nicely with Hells Canyon and similar earth-tone rifles.

What the 20 MOA Does for Your X-Bolt

The 20 minutes of angle is machined right into the mount, giving your scope a forward cant that frees up elevation travel. That means you can dial for longer distances without running out of adjustment inside the scope, which is the whole point if you shoot past a few hundred yards. For a standard hunting zero it still works fine, and the extra range on tap is there when you want to reach out.

Why the One-Piece Build Matters

Cut from lightweight aircraft-grade aluminum on CNC machines, these mounts run tight tolerances and come ready to bolt on out of the box. There is no lapping required, and Talley actually advises against it since the machining already keeps things true. The integrated ring-and-base design shaves weight compared to steel setups while giving you a rigid, solid platform that stays put under recoil, even on the hard-kicking magnums the Long/Magnum action is built around.

Mounting Notes

The set attaches to the receiver with 6-48 screws and uses a T-15 Torx bit, so a longer-shank bit makes torquing easier. Ring cap screws get 17 to 20 in-lbs, and for the receiver screws it is smart to check Browning's recommended torque. A drop of medium thread locker on the base screws and a calibrated torque driver will have your glass sitting straight and staying there season after season.

Key Specifications

  • Manufacturer: Talley
  • Manufacturer Part Number: HC750735LM
  • UPC: 876430002842
  • Rifle Fit: Browning X-Bolt (Long/Magnum Action)
  • Scope Tube Diameter: 30mm
  • Ring Height: High
  • Built-In Cant: 20 MOA
  • Finish: Burnt Bronze
  • Material: Lightweight Aircraft-Grade Aluminum (7000 Series)
  • Construction: One-Piece Integrated Ring and Base
  • Receiver Screws: 6-48 (T-15 Torx)
  • Lapping: Not Required
  • Made In: USA

What’s Included

  • Two-piece integrated Talley ring and base set
  • Mounting hardware (8) 6-48 receiver screws
  • Ring cap screws

Frequently Asked Questions

Will these Talley mounts fit my Browning X-Bolt?

These are cut specifically for the Browning X-Bolt with a Long/Magnum action and bolt straight to the factory receiver holes. The X-Bolt uses its own screw pattern, so generic two-piece bases will not fit, which is why a model-specific mount like this is the way to go. Make sure your action is the Long/Magnum length, since short-action X-Bolts use a different part.

What does the 20 MOA actually do?

The 20 MOA is a built-in forward cant that gives your scope extra elevation travel for shooting at longer distances. It lets you dial up without running out of adjustment inside the scope. It still works fine for a normal hunting zero, so you are not giving anything up at closer ranges.

Do I need to lap these rings before mounting?

No. Talley machines these to tight tolerances and recommends against lapping since the fit is already true out of the box. Lapping a set of these can actually void the warranty, so you can mount your scope straight away.

What tools and torque do I need to install them?

The receiver screws are 6-48 and use a T-15 Torx bit, and a longer-shank bit makes life easier when using a torque driver. Talley lists 17 to 20 in-lbs on the ring cap screws, and for the base screws it is best to verify Browning's recommended receiver torque. A drop of medium thread locker on the base screws helps everything stay put.

Additional information

UPC

876430002842

Manufacturer

Manufacturer Part Number

HC750735LM

Shipping Weight

0.255

Reviews

There are no reviews yet.

Be the first to review “Talley Browning X-Bolt 30mm High Scope Mounts 20 MOA Burnt Bronze”