Description
Talley built the Modern Sporting (TMS) ring to take the guesswork out of putting a 34mm optic on a flattop. This set clamps directly to any MIL-STD-1913 Picatinny rail and gives you a clean, no-nonsense mount with a High ring height, which is a popular choice for larger objective bells and bigger-tube scopes that need extra clearance over the rail. The Burnt Bronze Cerakote finish is a nice break from the usual black, pairing well with FDE and bronze-accented builds while adding a layer of protection against the elements.
What Sets the TMS 34mm High Rings Apart
Everything here is fully CNC machined from high-grade lightweight aircraft aluminum, so you get consistent, repeatable dimensions without a lot of extra bulk on the gun. The High version sits at 1.169 inches measured from the top of the rail to the centerline of the scope tube, and the pair comes in right around 3.7 ounces. One of the best parts is that lapping is not required, which saves you a step at the bench and keeps the warranty intact.
Getting Your Modern Sporting Rings Dialed In
Mounting is straightforward. Talley rates the locking plate screws on the TMS rings to be torqued up to 25 inch-pounds, which they consider more than enough to hold zero for any caliber as long as your rail and rings are within Picatinny spec. On the ring caps that clamp the scope tube, follow your optic maker's torque numbers so you don't mar the tube. Worth noting, Talley does not recommend using Loctite on these rings.
These are made in the USA and sold as a matched pair, so you've got everything you need to mount one scope. If you're running a 34mm scope on an AR-platform rifle, a precision bolt gun, or anything else wearing a Picatinny rail, the TMS High rings are a dependable, good-looking way to get it done.
Key Specifications
- Manufacturer: Talley
- Manufacturer Part Number: TMS34HBB
- UPC: 876430002743
- Ring Size: 34mm
- Ring Height: High (1.169 in. to tube centerline)
- Finish: Burnt Bronze Cerakote
- Material: High-grade lightweight aircraft aluminum
- Construction: Fully CNC machined
- Mount Type: MIL-STD-1913 Picatinny rail
- Locking Plate Torque: Up to 25 in-lbs
- Lapping: Not required
- Weight (pair): 3.7 oz
- Sold As: Pair
- Country of Origin: USA
What’s Included
- One pair of Talley Modern Sporting 34mm High scope rings
- Mounting hardware
Frequently Asked Questions
Will the Talley Modern Sporting 34mm rings fit my rail?
These rings are made to clamp onto any Picatinny rail built to MIL-STD-1913 specs. That covers most AR-style flattop uppers and plenty of bolt guns running an aftermarket or integral Pic rail. Just double-check your scope tube is 34mm before ordering.
Do I need to lap these TMS rings before mounting a scope?
No. Lapping is not required with the Talley Modern Sporting rings thanks to the fully CNC machined construction. In fact, lapping them voids the warranty, so you can mount your optic right out of the package.
How much should I torque the Talley Modern Sporting rings?
Talley rates the Picatinny locking plate screws up to 25 inch-pounds, which they consider plenty to hold zero for any caliber when your rail and rings are in spec. For the ring caps that hold the scope tube, stick to your optic manufacturer's recommended torque so you don't damage the tube. Talley also does not recommend using Loctite on these rings.
What does High height mean on these 34mm rings?
High height places the centerline of the scope tube about 1.169 inches above the top of the Picatinny rail. That extra clearance is handy for scopes with larger objective bells or big 34mm tubes that might otherwise contact the rail or handguard. If your optic is more compact, you may prefer the Low or Medium option instead.



Reviews
There are no reviews yet.