Description
Talley took the guesswork out of mounting a scope on your Browning X-Bolt with this one-piece design. Instead of a separate ring and base that can shift or work loose over time, the ring and base are machined as a single unit. That means there's no joint to fall out of alignment, which translates to a rock-solid platform that holds zero shot after shot. These are built specifically for X-Bolt rifles with short and super short actions, set up for 1-inch scope tubes at the low ring height.
What the 20 MOA Does for Your X-Bolt
The standout feature here is the 20 minutes of angle built right into the rings. That forward cant gives your scope extra elevation adjustment range, so when you dial up for longer shots you won't run out of travel before the bullet gets there. If you're stretching your X-Bolt out past typical hunting distances or just want more usable adjustment in your optic, the 20 MOA makes a real difference.
Built in the USA and Ready Out of the Box
These mounts are fully CNC machined from high-grade lightweight aircraft aluminum right here in America. The result is the strength you'd expect from steel at a fraction of the weight, which matters when you're carrying an X-Bolt up a mountain all day. Because they're cut to tight tolerances, no lapping is required, so you can get them on the rifle and head to the range without any extra fuss or special tools.
The Hell's Canyon Burnt Bronze Match
The Burnt Bronze Cerakote finish is made to pair with Browning's Hell's Canyon color scheme, so your mounts blend right in rather than sticking out. Beyond looking sharp, the Cerakote adds a layer of protection against the wear and weather a hunting rifle sees. Mounting is straightforward using the included 6-48 screws and T-15 wrench, and Talley recommends 17 to 20 inch-pounds on the ring cap screws for a secure hold.
Key Specifications
- Manufacturer: Talley
- Manufacturer Part Number: HC730735SM
- UPC: 876430000831
- Fits: Browning X-Bolt, Short/Super Short Action
- Scope Tube Diameter: 1 inch
- Ring Height: Low
- Built-In Elevation: 20 MOA
- Finish: Hell's Canyon Burnt Bronze Cerakote
- Material: Lightweight aircraft-grade aluminum
- Construction: One-piece integrated ring and base
- Mounting Hardware: (8) 1/4" 6-48 screws / T-15
- Lapping: Not required
- Country of Origin: Made in USA
- Sold As: Set (pair)
What’s Included
- One set of Talley Lightweight one-piece scope mounts (front and rear)
- (8) 1/4" 6-48 mounting screws
- T-15 wrench
Frequently Asked Questions
What does the 20 MOA on these Talley X-Bolt mounts actually do?
The 20 MOA is 20 minutes of angle built into the rings, which cants your scope slightly forward and downward. That gives you extra elevation adjustment range in your optic so you can dial up for longer shots without running out of internal travel. It's a popular choice for anyone wanting to reach out past typical hunting distances with their X-Bolt.
Will these fit my Browning X-Bolt?
These are made specifically for Browning X-Bolt rifles with short and super short actions. They're set up for 1-inch scope tubes at the low ring height. If your rifle is a long or magnum action, you'll want the version built for that length instead.
Do I need to lap these Talley mounts before mounting my scope?
No. Because the ring and base are machined as one piece to tight tolerances, no lapping is required and they're ready to install out of the box. Talley actually notes that lapping voids eligibility for product support, so you can skip that step entirely.
What hardware comes with the mounts and what's the torque spec?
Each set comes with (8) 1/4-inch 6-48 screws and a T-15 wrench, so you've got what you need to get them on the rifle. Talley recommends 17 to 20 inch-pounds on the ring cap screws. Always check with your scope maker for the maximum allowable torque on the main tube so you don't overtighten on the optic.





Reviews
There are no reviews yet.