0
0

MPA Cowl Induction Muzzle Brake 6.5mm 5/8-24 Black Nitride

UPC: 866803039889

$139.00

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

MasterPiece Arms built the Cowl Induction Muzzle Brake for one job: keeping your rifle planted so you can watch your own trace and see where the bullet lands. It's cut for 6.5mm and smaller calibers and threads onto a standard 5/8-24 muzzle, which makes it a natural fit for 6.5 Creedmoor, 6.5×55, and similar precision cartridges. The whole thing is machined from black nitrided high tensile strength steel, so it shrugs off heat, weather, and the abuse that comes with a heavy match season.

How the Cowl Induction Brake Tames Recoil

The magic is in the port pattern. Multiple blast ports redirect propellant gases outward and rearward to counter recoil, while the unique cowl geometry pushes gas upward to force the muzzle down. MPA runs their own testing rig and measured up to a 63% reduction in recoil, which in practice means less muzzle jump and a whole lot less time wasted getting back on target between shots. For PRS stages and any drill where the clock is running, that flat-shooting behavior pays off fast.

Getting the MPA Muzzle Brake Dialed In

Installation is where this brake really earns its keep. The jam nut collar system lets you snug the nut and brake against each other at exactly the right spot on your muzzle, so there's no fussing with ground shims or crush washers. Two machined flats give you a clean surface to level the brake and grab it with an adjustable wrench. Because the setup keeps the inner diameter perpendicular to the barrel shoulder, you get repeatable alignment and minimal point-of-impact shift once it's locked down.

If you're running a custom 6.5 build or a factory precision rifle and want a brake that installs clean, holds its zero, and keeps the crosshairs steady through recoil, this one belongs on the short list. It's a purpose-built piece from a name that lives and breathes precision rifle competition.

Key Specifications

  • Manufacturer: MasterPiece Arms
  • Manufacturer Part Number: MZLBRAKE-65
  • UPC: 866803039889
  • Caliber: 6.5mm or smaller
  • Thread Pitch: 5/8-24 TPI
  • Material: Black Nitrided High Tensile Strength Steel
  • Finish: Black Nitride
  • Recoil Reduction: Up to 63% (manufacturer tested)
  • Length: 4.15 in
  • Mounting System: Jam Nut Collar (no shims required)
  • Design Type: Cowl Induction Multi-Port Brake
  • Weight: 0.365 lb (shipping)

What’s Included

  • MPA Cowl Induction Muzzle Brake (6.5mm)
  • Jam nut collar

Frequently Asked Questions

What calibers will the MPA Cowl Induction Muzzle Brake work with?

This brake is bored for 6.5mm and smaller calibers, so it covers popular precision rounds like 6.5 Creedmoor, 6mm Creedmoor, 6.5×55, and similar cartridges. It threads onto a standard 5/8-24 muzzle. Just make sure your barrel is threaded 5/8-24 and your bore diameter is 6.5mm or under before mounting it up.

Do I need shims or a crush washer to install this muzzle brake?

No shims or crush washers needed. The jam nut collar system lets you position the brake exactly where you want it and lock the nut against it to hold timing. Two machined flats let you level the brake and grab it with an adjustable wrench during install.

How much recoil reduction does the Cowl Induction brake actually deliver?

MasterPiece Arms measured up to a 63% reduction in felt recoil using their own testing system. Real-world results vary with your rifle, cartridge, and load, but the multi-port cowl design does a strong job of keeping the muzzle flat. That translates to faster, more confident follow-up shots and the ability to spot your own trace.

Is this brake a good fit for PRS and precision competition?

Yes, that's exactly what it was designed for. The port pattern drives gas up to force the muzzle down, helping you stay on target and watch impacts through a stage. Paired with a solid threadlocker, it holds alignment and point of impact shot after shot.

Additional information

UPC

866803039889

Manufacturer

Manufacturer Part Number

MZLBRAKE-65

Color

MUZZLEBRAKE/BLACK

Length

4.1500

Shipping Weight

0.365

Reviews

There are no reviews yet.

Be the first to review “MPA Cowl Induction Muzzle Brake 6.5mm 5/8-24 Black Nitride”