0
0

Kano Labs KROIL Penetrant with Silicone Aerosol 16.5 oz

UPC: 857236004032

$37.49

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

There are penetrating oils, and then there's KROIL. Kano Labs has been making this stuff in the USA since 1939, and it built a reputation the hard way, by freeing up bolts and parts that everything else gave up on. This is the silicone version (you might remember it as Silikroil), which takes the legendary KROIL formula and adds silicone for extra lubrication, better moisture displacement, and stronger rust prevention. It comes in a handy 16.5 oz aerosol can that gets the oil right where you need it.

The way KROIL works is what sets it apart. It's a high-solvency oil that creeps into the tightest openings, threads, and crevices to break the bond of rust at the molecular level, then leaves behind lubrication that keeps things moving. That means less torque to loosen seized nuts and bolts and a lot less busted knuckles. It's built for frozen bearings, slides, gate valves, hinges, chains, and just about any metal mechanism that's fought the weather and lost.

Why Gunsmiths Reach for KROIL with Silicone

Ask around at any gun bench and KROIL comes up fast. It's a go-to for lifting stubborn lead fouling and old carbon out of bores, and it shines on rusty milsurp rifles and revolvers that need reviving. A common trick is soaking a fouled bore, letting it sit, then running a bronze brush and dry patches through. Folks who restore old guns like that it lifts surface rust and crud (often paired with 0000 steel wool or a brass brush) without harming bluing when used with care. It's also a proven fix for freeing up stuck choke tubes.

Getting the Most Out of Your KROIL

KROIL rewards patience. It's a penetrant, so give it time to creep, sometimes 20 minutes, sometimes overnight, before you go after that seized part. The added silicone helps displace water and fight off future corrosion, which makes this a smart pick in coastal areas or anywhere salt and humidity are a factor. Keep in mind it's a strong solvent, so it's happiest on metal rather than polymer or plastic parts.

Key Specifications

  • Manufacturer: Kano Labs (Kano Laboratories)
  • Product: KROIL Penetrant with Silicone (formerly Silikroil)
  • Type: Penetrating oil with silicone
  • Form: Aerosol spray
  • Volume: 16.5 oz
  • Primary Uses: Loosens frozen parts, cleans fouling, lubricates, prevents rust
  • Metal Compatibility: Safe on all metals
  • Corrosion Protection: Displaces moisture, resists salt and humidity
  • Country of Origin: Made in the USA
  • Manufacturer Part Number: KS162
  • UPC: 857236004032
  • Shipping Weight: 1.3 lbs

What’s Included

  • One 16.5 oz aerosol can of KROIL Penetrant with Silicone

Frequently Asked Questions

Can I use KROIL with Silicone to clean my gun bore?

Yes, and plenty of folks swear by it for exactly that. Its penetrating action lifts stubborn lead fouling, carbon, and surface rust, especially on older or neglected barrels. Spray it in, let it sit for a while, then run a bronze brush and dry patches through. Many use it as a final step after an ammonia-based solvent handles copper fouling.

Will KROIL damage the bluing on my firearm?

When used carefully, KROIL is generally regarded as safe on bluing and won't strip it. What people sometimes mistake for lost finish is usually old grime, dried oil, or grease coming off. If you're removing surface rust with 0000 steel wool or a brass brush, work gently and check as you go.

What's the difference between KROIL with Silicone and Original KROIL?

Both share the same legendary penetrating base that Kano Labs has made since 1939. The silicone version adds extra lubrication, improved moisture displacement, and stronger rust prevention on top of that penetration. It's a solid choice when you want lasting protection in wet, humid, or coastal conditions.

How long should I let KROIL sit before working a stuck part?

KROIL is a penetrant, so it needs time to creep into the threads and crevices to do its job. For lightly seized hardware, a few minutes may be enough, but heavily rusted bolts or fouled bores often do best with a soak of 20 minutes up to overnight. The longer it sits on a stubborn part, the better your results.

Additional information

UPC

857236004032

Manufacturer

Manufacturer Part Number

KS162

Shipping Weight

1.3

Reviews

There are no reviews yet.

Be the first to review “Kano Labs KROIL Penetrant with Silicone Aerosol 16.5 oz”