Description
Getting a scope mounted dead level is one of those jobs that eats up more time and patience than it should, usually with a pile of little bubble levels stacked on your action. The RPM Bravo 35mm Cantilever Mount from Rubicon Precision Manufacturing fixes that with a co-linear bubble level built right into the mount. It sits where you can see it from the shooting position using your non-dominant eye, so you get a quick cant check before you break the shot and a clean reference while you're actually setting the optic in place.
This is the 35mm version with a 1.50" height measured to the center of the ring and optic, which is a comfortable standard for most AR-pattern rifles and larger precision scopes with big objective bells. The cantilever design pushes the optic forward to help you nail proper eye relief, and an integrated recoil lug keeps everything anchored under repeated firing so your zero holds.
What Sets the RPM Bravo Mount Apart
The build is where this mount earns its keep. The ring body and cap are machined from 6061-T6 aluminum, with a 303 stainless steel cross bolt and nut in a 1/2" size clamping it to the rail. RPM also added an alignment lug that keeps the cap and base lined up correctly as you run down the cap screws, which takes one more variable out of the equation when you're torquing things to spec. The whole thing is proudly made in the USA.
Dialing In Your Bravo Cantilever Mount
If you like to do your own install, the recommended torque values are 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt. Stick to those numbers with a quality torque wrench and you'll get consistent clamping without over-stressing the aluminum. It's a straightforward setup that rewards a little care up front with a stable, repeatable platform you won't have to second-guess at the range or in the field.
Key Specifications
- Manufacturer: Rubicon Precision Manufacturing (RPM Mounts)
- Model: Bravo Series Cantilever
- Manufacturer Part Number: BC-35150
- UPC: 850063702133
- Optic Tube Diameter: 35mm
- Center Height: 1.50" to center of ring/optic
- Mount Type: Cantilever
- Ring Body & Cap Material: 6061-T6 Aluminum
- Cross Bolt & Nut: 303 Stainless Steel, 1/2"
- Integrated Features: Co-linear bubble level, recoil lug, alignment lug
- Color: Black
- Cap Screw Torque: 18 in/lbs
- Cross Bolt Torque: 45 in/lbs
- Weight: Approx. 6.0 oz
- Made In: USA
What’s Included
- RPM Bravo 35mm cantilever mount with integrated co-linear bubble level
Frequently Asked Questions
What size scope tube does the RPM Bravo cantilever mount fit?
This version is built for 35mm main tube optics. RPM also offers the Bravo in 30mm and 34mm, so make sure your scope's tube diameter matches before ordering. This one is strictly a 35mm mount.
How tall is the RPM Bravo 35mm mount?
It's a 1.50" height measured to the center of the ring and optic. That's a popular all-around height that clears larger objective bells on most AR-platform rifles and leaves room for flip caps. If you run an oversized objective, it's always worth a quick measurement to confirm clearance.
How does the built-in bubble level work?
The co-linear level is integrated into the mount and positioned so you can see it from the shooting position with your non-dominant eye. It gives you a fast cant check before the shot and acts as a reference while you're leveling the scope during install, which means no juggling separate little levels on your action.
What are the recommended torque specs for installing the Bravo mount?
RPM recommends 18 in/lbs on the cap screws and 45 in/lbs on the cross bolt. A good torque wrench is the way to go here so you get even, repeatable clamping without over-tightening the aluminum rings. The integrated alignment lug helps keep the cap and base squared up as you snug everything down.





Reviews
There are no reviews yet.