0
0

YHM HUB Direct Thread Mount 3/4×24 – Yankee Hill Machine 2189-24C

UPC: 841812102625

$74.75

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Sometimes the best mounting system is no mounting system at all. The YHM HUB Direct Thread Mount takes any suppressor built on the industry standard 1.375×24 HUB pattern and converts it to a clean, no-fuss direct thread attachment. This version, model YHM-2189-24C, is cut for 3/4×24 barrel threads, a size you will run into on plenty of big-bore and pistol-caliber hosts. With a .45 caliber bore, it has the clearance to work across a wide range of calibers up to and including .45.

Why Run a YHM Direct Thread Mount

Quick-detach systems are handy, but they add length, weight, and cost, and a lot of folks who leave a can on one host never need them. Going direct thread trims the whole package down and keeps things dead simple. This mount weighs right around 1.7 ounces, so it shaves noticeable weight off the back end of your suppressor compared to most muzzle device mounts. Because the HUB interface has become the common standard across the suppressor world, this little adapter works with cans from a long list of manufacturers, not just YHM's own R9 and Resonator lineup.

Built the Yankee Hill Way

Yankee Hill Machine has been machining suppressors and mounts in Massachusetts for decades, and this piece follows suit. It is made from 17-4PH stainless steel that has been heat treated for strength, then given a black oxide finish to fight off corrosion and keep the look subdued. Installation could not be much easier: unscrew the existing mount from the back of your HUB suppressor, snug this one in place with a 3/4 inch open-end wrench, and thread the can straight onto your barrel. That is the whole job.

A Smart Add-On for Any HUB Suppressor

Whether you are dedicating a can to one rifle or just want a lighter, shorter setup, this mount is one of those parts that quietly does its job for years. Keep one in the range bag and your HUB suppressor gets a lot more flexible.

Key Specifications

  • Manufacturer: Yankee Hill Machine
  • Manufacturer Part Number: YHM-2189-24C
  • UPC: 841812102625
  • Suppressor Interface: 1.375"-24 HUB
  • Barrel Thread Pitch: 3/4"-24 TPI
  • Bore Diameter: .45 Caliber
  • Material: 17-4PH Heat-Treated Stainless Steel
  • Finish: Black Oxide
  • Color: Black
  • Weight: Approx. 1.7 oz
  • Install Tool: 3/4" Open-End Wrench
  • Country of Origin: USA

What’s Included

  • YHM HUB Direct Thread Mount, 3/4×24 (YHM-2189-24C)

Frequently Asked Questions

Will the YHM HUB Direct Thread Mount fit suppressors from other brands?

Yes. The 1.375×24 HUB thread pattern is an industry standard used by a huge number of suppressor makers, so this mount works with most HUB-compatible cans, not just Yankee Hill models. If your suppressor's rear cap or mount threads out and accepts 1.375×24 hardware, you are in business.

What thread size is this specific model, and what calibers can I run through it?

The YHM-2189-24C is cut for 3/4×24 barrel threads with a .45 caliber bore. That means it will pass anything up to .45, as long as your suppressor itself is rated for the caliber and pressure you plan to shoot. Always match the can's rating to the host, since the mount is just the connection point.

How do I install the HUB Direct Thread Mount on my suppressor?

It is about a two-minute job. Remove the existing mount or rear cap from your HUB suppressor, thread this mount into its place, and snug it down with a standard 3/4 inch open-end wrench. From there the whole suppressor spins straight onto your 3/4×24 threaded barrel.

Is a direct thread mount better than a quick-detach setup?

It depends on how you shoot. Direct thread is lighter, shorter, and cheaper since there are no muzzle devices to buy for each host, and it is a great fit if a can mostly lives on one gun. QD systems make more sense if you are constantly swapping a suppressor between several rifles and want fast on-and-off. Many people running one dedicated host find direct thread is all they need.

Additional information

UPC

841812102625

Manufacturer

Manufacturer Part Number

YHM-2189-24C

Color

Black

Length

5.5500

Shipping Weight

0.134

Reviews

There are no reviews yet.

Be the first to review “YHM HUB Direct Thread Mount 3/4×24 – Yankee Hill Machine 2189-24C”

Related Products