Description
A piston is one of those small parts that makes or breaks a suppressed pistol setup, and Yankee Hill Machine got this one right. The Nielsen Piston in M16x1 RH thread is machined from heat treated 17-4 stainless steel, so it shrugs off carbon, heat, and the grime that builds up inside a booster assembly after a few hundred rounds. The M16x1 right-hand thread pattern covers metric-threaded .45 barrels, most famously the HK Mark 23, which makes this the piston to grab if your barrel does not play nice with the standard .578×28 pattern.
Ten Points of Adjustment on the YHM Nielsen Piston
One feature that sets this piston apart from a lot of the competition is the 10 adjustment points built into the design. Point of impact shift is just part of life when you hang a can on a pistol, and being able to index the piston through ten positions lets you walk your zero back to where it belongs instead of just living with it. It is a small touch, but if you have ever chased a wandering group after swapping suppressors between hosts, you will appreciate it.
Fitment for the YHM 2062-MR Piston
This piston drops into YHM's Booster Assembly (YHM-2055) and works with the Sidewinder M2, R9, and Nitro N20. It also runs in a bunch of popular third-party pistol suppressors, including the SilencerCo Octane and Omega 45K, Rugged Obsidian series, and the Dead Air Odessa 9. One thing worth knowing before you order: it will not work with the original Sidewinder, only the M2 version.
At 1.40 ounces, it adds barely anything to your setup, and having a spare or caliber-specific piston on hand means less time swapping parts at the bench and more time behind the gun. Whether you are outfitting a new host or replacing a worn piston that has seen a lot of rounds, this is solid, no-nonsense machining from a company that has been making suppressor parts longer than most.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Manufacturer Part Number: YHM-2062-MR
- UPC: 841812101611
- Caliber: .45 Cal
- Thread Pitch: M16x1 RH
- Material: Heat Treated 17-4 Stainless Steel
- Finish: Silver / Stainless
- Adjustment Points: 10
- Weight: 1.40 oz
- Booster Compatibility: YHM Booster Housing YHM-2055
- Suppressor Compatibility: YHM Sidewinder M2, R9, Nitro N20; SilencerCo Octane, Omega 45K; Rugged Obsidian; Dead Air Odessa 9
- Fitment Note: Not compatible with the original YHM Sidewinder
What’s Included
- YHM Nielsen Piston, .45 Cal M16x1 RH (YHM-2062-MR)
Frequently Asked Questions
Which pistols use the M16x1 RH thread on this YHM Nielsen Piston?
The M16x1 right-hand metric thread is most commonly found on the HK Mark 23 and similar metric-threaded .45 barrels. Double-check your barrel's thread pattern before ordering, since HK also produced left-hand M16x1 barrels and YHM makes a separate piston (YHM-2062-ML) for those.
Will the YHM 2062-MR piston work in suppressors other than YHM cans?
Yes. Beyond the YHM Booster Assembly, Sidewinder M2, R9, and Nitro N20, this piston fits several popular third-party pistol suppressors, including the SilencerCo Octane and Omega 45K, Rugged Obsidian 9 and 45, and Dead Air Odessa 9. Just note it does not fit the original Sidewinder suppressor.
What do the 10 adjustment points on the Nielsen Piston do?
Adding a suppressor to a pistol often shifts your point of impact. The ten indexing positions let you rotate the piston to different orientations so you can tune out that shift and bring your groups back to zero. It is a practical feature that saves a lot of frustration when moving a can between hosts.
Do I need a booster assembly to use this piston?
Yes, the piston is one part of a complete Nielsen device. It threads into a booster housing such as YHM's 2055 assembly, along with the spring, and the whole unit allows a tilting-barrel pistol to cycle reliably with the added weight of a suppressor. If you already own a compatible booster or suppressor with a booster built in, this piston is all you need.




Reviews
There are no reviews yet.