Description
The SilencerCo AC5049 is a threaded replacement barrel built for the Glock 43 and 43X, giving that slim single-stack the 1/2×28 muzzle you need to run a suppressor or muzzle device. It drops right into your factory slide, so there's no fitting or gunsmithing involved. Pull your stock barrel, slide this one in, and you're set up for a threaded muzzle.
SilencerCo cut this barrel from 416R stainless steel and finished it in black nitride, which is the same recipe they use across their pistol barrel line. That combination gives you a hard, corrosion-resistant surface that shrugs off the heat and fouling that come with suppressed shooting. It carries a 1:12 right-hand twist and a 1/2×28 right-hand thread pattern, so it plays nice with the vast majority of 9mm cans and comps on the market. A thread protector comes in the box to keep the threads dinged-free when you're running the pistol bare.
Why the Glock 43 Barrel Needs a Special Piston
Here's the one detail that trips people up. The Glock 43 has a shorter barrel than its bigger siblings, which means the threaded section is shorter too. Because of that, a standard 1/2×28 piston won't seat correctly. SilencerCo designed a dedicated 1/2×28 SN piston (AC1756) specifically for this barrel, and that's the one you'll want if you're mounting a suppressor. It's sold separately, so plan to grab one alongside this barrel for a suppressed setup.
Getting the Most Out of Your Glock 43 Threaded Barrel
Folks who have run these report clean fit and finish and reliable feeding with a wide range of ammo. If you're just adding a compensator or want the threaded option for down the road, this barrel handles that too. Point of impact tends to stay right where your factory barrel put it, so you're not chasing a new zero after the swap. It's a straightforward, well-made upgrade from a company that knows the suppressor world inside and out.
Key Specifications
- Manufacturer: SilencerCo
- Manufacturer Part Number: AC5049
- UPC: 817272018288
- Fits: Glock 43 / 43X
- Caliber: 9mm
- Barrel Length: 3.7"
- Thread Pattern: 1/2×28 RH
- Twist Rate: 1:12 RH
- Material: 416R Stainless Steel
- Finish: Black Nitride
- Color: Black
- Style: Threaded
What’s Included
- SilencerCo Glock 43/43X threaded barrel
- Thread protector
Frequently Asked Questions
Will this SilencerCo barrel fit both the Glock 43 and 43X?
Yes, the AC5049 is designed to work in both the Glock 43 and the Glock 43X. It's a drop-in replacement that seats in your factory slide, so no gunsmithing is needed. Pull your stock barrel and swap this one in.
Does the Glock 43 threaded barrel come with a piston for my suppressor?
No, the piston is not included with this barrel. The Glock 43 has shorter threads than other Glocks, so it requires SilencerCo's dedicated 1/2×28 SN piston (AC1756) rather than a standard one. You'll want to order that separately if you're mounting a suppressor.
What thread pitch is on this barrel?
It uses a 1/2×28 right-hand thread pattern, which is the standard for 9mm suppressors and muzzle devices. A thread protector is included to guard those threads when you're running the pistol without a can or comp attached.
Will swapping in this barrel change where my rounds hit?
Most owners find point of impact stays very close to their factory barrel, so you generally won't need to chase a new zero. The 416R stainless build and 1:12 twist are made to hold accuracy. It also tends to feed a wide range of ammo reliably.



Reviews
There are no reviews yet.