0
0

Talley Browning X-Bolt 34mm High 20 MOA Scope Mounts – Smoked Bronze

UPC: 810301025158

$100.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're running a Browning X-Bolt in a Long or Magnum action and want a scope mount that just works, these Talley Lightweight mounts are about as solid as it gets. Instead of a separate base and ring that can drift out of line over time, Talley machines the ring and base as one continuous piece. That means there's no joint to loosen up and nothing to knock your alignment off once you've got it dialed. This set is sized for a 34mm scope tube, sits at a high ring height, and carries 20 MOA of built-in cant.

Why the 20 MOA Cant on These X-Bolt Mounts Matters

The 20 Minutes of Angle built into the rings tilts your scope slightly forward, which hands back a big chunk of elevation adjustment in your turret. That extra travel is what lets you reach way out there without running out of up in your dial, so the 20 MOA version is the one you want if long-range work is part of the plan. For a magnum X-Bolt pushing flat-shooting rounds across open country, that forward cant earns its keep.

Build and Finish on the Talley Smoked Bronze Mounts

Talley fully CNC machines these from high-grade aircraft aluminum, so you get serious rigidity and a hold that stays put under recoil, all while shaving weight compared to steel. The Smoked Bronze Cerakote finish is tough and gives you that factory-matched look alongside Browning's bronze-toned rifles. One of the nicest parts is that they're ready to go out of the box with no lapping required, which saves you a step and a trip to the gunsmith.

Fit and Install Notes for the Browning X-Bolt Set

These are made specifically for the Browning X-Bolt in Long and Magnum length actions, and they mount directly to the receiver using the included hardware. Sold as a pair, the set comes with the mounting screws and a Torx wrench so you've got what you need to get mounted the same day they show up. Proudly made in America.

Key Specifications

  • Manufacturer: Talley
  • Manufacturer Part Number: SB850735LM
  • UPC: 810301025158
  • Rifle Fit: Browning X-Bolt (Long/Magnum Action)
  • Tube Diameter: 34mm
  • Ring Height: High
  • Built-In Cant: 20 MOA
  • Design: One-Piece Integrated Ring and Base
  • Material: Aircraft-Grade Aluminum, CNC Machined
  • Finish: Smoked Bronze Cerakote
  • Mounting Screws: 6-48, Torx (T-15)
  • Sold As: Pair
  • Lapping Required: No
  • Country of Origin: USA
  • Shipping Weight: 0.235 lbs

What’s Included

  • Pair of Talley one-piece scope mounts (ring and base combined)
  • Mounting screws (6-48)
  • T-15 Torx wrench

Frequently Asked Questions

Will these Talley mounts fit any Browning X-Bolt?

This set is built for Browning X-Bolt rifles with Long and Magnum length actions. The hole spacing and fit are matched to that receiver, so double-check your action length before ordering. If you've got a Short or Super Short action X-Bolt, you'll want the version made for that footprint instead.

What does the 20 MOA on these X-Bolt scope mounts actually do?

The 20 MOA is a built-in forward tilt in the rings that gives you extra elevation adjustment in your scope's turret. That's a big help for long-range shooting, since it keeps you from running out of up-dial when you're reaching out to distance. For closer-range hunting the cant isn't a drawback, but it really shines when you're stretching things out.

Do I need to lap these mounts before installing my scope?

No lapping needed. Because Talley machines the ring and base as a single piece to tight tolerances, these come ready to install right out of the box. That one-piece design also means there's no joint between the ring and base to work loose or fall out of alignment.

What size scope tube do these Talley mounts take, and what's included?

These are made for a 34mm scope tube at a high ring height. The set is sold as a pair and ships with the 6-48 mounting screws and a T-15 Torx wrench, so you've got the hardware to mount directly to the receiver. A good Torx driver and a torque wrench are handy for getting everything snugged to spec.

Additional information

UPC

810301025158

Manufacturer

Manufacturer Part Number

SB850735LM

Shipping Weight

0.235

Reviews

There are no reviews yet.

Be the first to review “Talley Browning X-Bolt 34mm High 20 MOA Scope Mounts – Smoked Bronze”