Description
Talley's Browning X-Bolt mount takes the two-piece ring-and-base headache off the table. It combines the ring and base into one solid CNC-machined piece, so there's no separate interface to work loose or drift out of alignment over a season of recoil and truck rides. If you've ever fought a scope that slowly walked off zero, this design is the fix. It's cut for a 34mm tube, sits at Low height, and carries a 20 MOA elevation offset machined right into the rings.
What the 20 MOA Does on Your X-Bolt
That 20 MOA built-in angle tilts the scope forward, which hands you back a big chunk of internal elevation travel. For anyone stretching a Long or Magnum action X-Bolt out past where the rifle normally runs out of adjustment, it means you can dial up for distance without maxing out your turret. If you shoot inside normal hunting ranges it won't hurt a thing, and if you like reaching out, you'll be glad it's there.
Fit and Finish on the Smoked Bronze Mount
This set is made specifically for the Browning X-Bolt Long/Magnum action footprint, so it drops right onto the receiver without adapters or shims. It's machined from lightweight aircraft-grade aluminum, which keeps the overall package lighter than steel rings and bases while staying plenty rigid. The Smoked Bronze Cerakote finish is tough and pairs nicely with earth-tone and bronze-accented rifles. Because the tolerances are held tight from the factory, lapping isn't required and will void the warranty if you do it.
Getting It Mounted
The set is sold as a pair and comes with everything you need to bolt it down, including the base screws and the T-15 wrench. Talley suggests running the ring cap screws to 17-20 in/lb and verifying your scope maker's max tube torque so you don't mar the tube. A drop of blue thread locker on the receiver screws is fine if you want extra insurance, though it isn't strictly necessary.
Key Specifications
- Manufacturer: Talley
- Manufacturer Part Number: SB830735LM
- UPC: 810301025134
- Model: Browning X-Bolt 20 MOA
- Tube Diameter: 34mm
- Ring Height: Low
- Built-In MOA: 20 MOA
- Action Fit: Browning X-Bolt Long/Magnum
- Design: Integrated one-piece ring and base
- Material: Aircraft-grade aluminum (6000 series)
- Finish: Smoked Bronze Cerakote
- Mount Type: To receiver
- Base Screws: 1/4" 6-48 (T-15)
- Sold As: Pair
- Made In: USA
What’s Included
- Pair of Talley Browning X-Bolt one-piece scope mounts (34mm Low, 20 MOA)
- Mounting screws (1/4" 6-48)
- T-15 wrench
Frequently Asked Questions
Will this Talley mount fit my Browning X-Bolt?
This set is cut specifically for the Browning X-Bolt Long/Magnum action, so it mounts directly to the receiver with no rail or adapter needed. If you have a Short or Super Short action X-Bolt, you'll want the version made for that footprint instead. Matching the action length is the key to getting the right fit.
What does the 20 MOA do and do I need it?
The 20 MOA is a forward tilt machined into the rings that gives your scope more usable elevation travel for longer-range shooting. If you like stretching your X-Bolt out past typical hunting distances, it helps you dial up without running out of turret. For normal ranges it's a non-issue and won't affect your zero.
What scope tube size does this mount take?
These rings are built for a 34mm scope tube, which is a common size on modern long-range and premium optics. Measure your scope's main tube before ordering, since a 1-inch or 30mm scope will not fit these rings.
Do I need to lap the rings before mounting my scope?
No. Talley machines these to tight tolerances so they're ready to go out of the box, and lapping isn't required. In fact, lapping these rings will void the warranty, so just torque them to spec and you're set.





Reviews
There are no reviews yet.