0
0

Talley Browning X-Bolt 34mm 20 MOA Scope Mounts Med Burnt Bronze

UPC: 810301025080

$100.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Talley took the guesswork out of mounting glass on a Browning X-Bolt with this integrated 34mm ring-and-base combo. Instead of stacking a separate base and ring like a traditional two-piece setup, the ring and base are machined as a single unit. That means there's no loose connection to work itself out under recoil and nothing to knock your scope out of alignment downrange. These are the Medium height mounts cut for Long and Magnum length X-Bolt actions, with a 34mm bore to fit larger main tube scopes, finished in Burnt Bronze.

What the 20 MOA Cant Does on Your X-Bolt

The 20 minutes of angle built into these mounts tilts your scope forward, which hands you a chunk of extra elevation travel before you ever touch the turret. For anyone shooting past a few hundred yards or running a magnum cartridge that drops hard at distance, that built-in cant keeps you from running out of adjustment right when you need it most. If your hunting or target work stays inside normal ranges you'll still have plenty of dial, but the 20 MOA is there when the shots get long.

Why the One-Piece Talley Design Holds Up

These are fully CNC machined from lightweight aircraft-grade aluminum to tight tolerances, so they're rigid and ready right out of the box with no lapping required. You get the strength you'd expect from a quality mount without hauling around the extra weight of steel rings and bases. Each ring carries four 1/4" 6-48 screws driven by a T-15, and Talley spec's the ring cap screws at 17 to 20 in/lb. The X-Bolt's X-Lock base pattern uses a cross or diagonal tightening sequence for even pressure, and a drop of blue Loctite on the receiver screws is fine, though Talley does not recommend it on the ring screws.

Burnt Bronze Finish That Matches the X-Bolt Look

The Burnt Bronze finish gives these mounts a warm, earthy tone that pairs nicely with a lot of modern X-Bolt stocks and Cerakoted barreled actions. It's a clean, understated look that blends into a hunting rig rather than shouting for attention.

Key Specifications

  • Manufacturer: Talley
  • Manufacturer Part Number: HC840735LM
  • UPC: 810301025080
  • Fits: Browning X-Bolt Long / Magnum Action
  • Ring Diameter: 34mm
  • Ring Height: Medium
  • Built-In Cant: 20 MOA
  • Design: One-piece integrated ring and base
  • Material: Aircraft-grade aluminum
  • Finish: Burnt Bronze
  • Ring Screws: (4) 1/4" 6-48 per ring, T-15
  • Ring Cap Screw Torque: 17-20 in/lb
  • Made In: USA

What’s Included

  • Pair of one-piece 34mm Medium height scope mounts
  • Mounting screws
  • T-15 wrench

Frequently Asked Questions

Will these Talley X-Bolt mounts fit my rifle's action length?

These are machined specifically for the Browning X-Bolt Long and Magnum length actions, so they're the right choice for the bigger receivers. If you're running a Short or Super Short action X-Bolt, you'll want Talley's version cut for that footprint instead. Matching the mount to your action length is what keeps the fit tight and correct.

What size scope do the 34mm rings work with?

The 34mm bore is made for scopes with a 34mm main tube, which is common on many modern long-range and premium optics. If your scope has a 30mm or 1-inch tube, you'll need the matching ring size, since these won't clamp down properly on a smaller tube. Always check your scope's tube diameter before ordering.

Do I need to lap these Talley mounts before mounting a scope?

No. They're CNC machined to tight tolerances as a single rigid unit, so they're ready to go straight out of the box with no lapping needed. That one-piece design also removes the alignment headaches you can run into with separate base-and-ring setups.

What torque should I use when installing these mounts?

Talley recommends 17 to 20 in/lb on the ring cap screws. The base screws going into the X-Bolt receiver should be tightened in a cross pattern for even pressure, and Browning's X-Bolt spec typically runs lower than many rifles, so verify the receiver torque with Browning. A little blue Loctite on the receiver screws is fine, but Talley advises against using it on the ring screws.

Additional information

UPC

810301025080

Manufacturer

Manufacturer Part Number

HC840735LM

Shipping Weight

0.255

Reviews

There are no reviews yet.

Be the first to review “Talley Browning X-Bolt 34mm 20 MOA Scope Mounts Med Burnt Bronze”