Description
Talley's one-piece design does away with the usual two-part ring-and-base setup, which means there's no separate interface to shift or work loose under recoil. For the Browning X-Bolt, that translates to a rock-solid mounting platform that holds zero and makes mounting a 34mm scope about as painless as it gets. This particular mount is cut for the short and super short action X-Bolt, sits at the low height, and wears Talley's burnt bronze finish that pairs nicely with Hells Canyon and bronze-accented rifles.
Why the Talley X-Bolt Mount Keeps Your Zero
Because the rings and base are machined from a single block, there's no stacking of tolerances and nothing to misalign. Talley holds these to very tight tolerances, so lapping isn't required and the mount is ready to go straight out of the box. The whole thing is cut from high-grade lightweight aircraft aluminum, giving you the strength you want around a heavy 34mm optic without the extra ounces that steel rings would add. At the low height, this 34mm version comes in right around 2.6 ounces.
Getting More Reach From Your X-Bolt
The built-in 20 MOA cant is the feature long-range folks will care about most. That forward taper gives your scope extra elevation travel, so when you dial up for distance you've got more room in the turret before you run out of adjustment. If you're shooting a flat-shooting magnum or just want to reach way out past where your rifle is comfortable zeroed, that 20 MOA buys you the holdover you need to get there.
Fit and Finish on the Burnt Bronze Talley Mount
The burnt bronze color is a clean match for X-Bolt Hells Canyon rifles and anything with bronze Cerakote accents. It's a tidy, purpose-built look rather than a bolt-on afterthought. Talley builds these in America and they ship with everything you need to get the mount on the receiver, so you're not hunting for extra hardware before you can mount glass.
Key Specifications
- Manufacturer: Talley
- Manufacturer Part Number: HC830735SM
- UPC: 810301025042
- Rifle Fitment: Browning X-Bolt (Short / Super Short Action)
- Scope Tube Diameter: 34mm
- Ring Height: Low
- Built-in MOA: 20 MOA
- Finish/Color: Burnt Bronze
- Material: Lightweight Aircraft-Grade Aluminum
- Design: One-Piece Integrated Ring and Base
- Weight: Approx. 2.6 oz
- Lapping: Not Required
- Country of Origin: Made in USA
What’s Included
- Talley one-piece 34mm scope mount (burnt bronze)
- (8) 1/4" 6-48 mounting screws
- T-15 wrench
Frequently Asked Questions
Will this Talley mount fit my Browning X-Bolt?
This mount is machined specifically for the Browning X-Bolt in the short and super short action length. It's a direct fit using the X-Bolt's factory screw holes, so you won't need a rail or adapter. Just confirm your X-Bolt is a short or super short action before ordering, since Talley also makes a separate long and magnum version.
What does the 20 MOA do on this Talley X-Bolt mount?
The 20 MOA is a built-in forward cant that tilts the scope slightly down toward the muzzle. This gives your optic extra elevation travel in the turret, which is exactly what you want for dialing long-range shots. If most of your shooting is closer in, a 0 MOA version works fine, but the 20 MOA pays off once you start reaching out past a few hundred yards.
Do I need to lap these rings before mounting a scope?
No, lapping is not required. Because the rings and base are CNC machined from a single piece of aluminum to tight tolerances, they come properly aligned from the factory. In fact, lapping these voids the Talley warranty, so you can mount your optic right out of the box.
Will the low height clear a 34mm scope with a large objective?
Low rings keep the scope tucked down close to the bore for a better cheek weld, but they leave less room under the objective bell. A low mount works well with smaller to mid-size objectives, while a large-objective scope may clear better with the medium or high version. Measure your objective diameter against your barrel contour if you're unsure.



Reviews
There are no reviews yet.