Description
If you shoot a Browning X-Bolt and want a mount that just works, Talley's one-piece design takes the guesswork out of getting glass on your rifle. These mounts combine the ring and base into a single CNC-machined aluminum unit, so there's no joint between ring and base to fall out of alignment or work loose over time. That one-piece build is what gives you a rigid, repeatable platform shot after shot, and it keeps overall weight down compared to heavier steel setups.
This particular set is built for the short and super short action X-Bolt, holds a 30mm scope tube, and sits at the low ring height to keep your optic tucked close to the bore. The smoked bronze finish gives it a sharp look that plays nicely with earth-tone and FDE builds without screaming for attention.
What the 20 MOA Cant Does for Your X-Bolt
The rings have 20 minutes of angle built right in, which tilts your scope forward slightly. In plain terms, that gives you more elevation travel in your turret for reaching out to longer distances. It's a feature long-range and extended-distance hunters appreciate, and it comes baked into the mount so you're not stacking shims or adding a separate rail.
Why Talley Mounts Earn Their Spot
Talley has been making scope mounts for better than four decades, and these are machined to tight tolerances from lightweight aircraft-grade aluminum. They're designed to drop onto the X-Bolt receiver and go, with no lapping needed out of the box. Keep in mind that lapping these will void the warranty, so there's genuinely no reason to touch them with a lapping bar.
Installation is straightforward using the included 6-48 screws and the T-15 wrench that comes in the package. If you've been running a two-piece setup and chasing zero or fighting alignment, moving to a one-piece Talley is one of those upgrades you notice right away.
Key Specifications
- Manufacturer: Talley
- Manufacturer Part Number: SB730735SM
- UPC: 810301024984
- Model: Browning X-Bolt 20 MOA
- Fits: Browning X-Bolt Short/Super Short Action
- Tube Diameter: 30mm
- Ring Height: Low
- Built-In Cant: 20 MOA
- Finish: Smoked Bronze
- Material: Lightweight Aircraft-Grade Aluminum (6061)
- Design: One-Piece Integrated Ring and Base
- Mount Type: To Receiver
- Mounting Screws: 6-48
- Lapping: Not Required
- Country of Origin: USA
What’s Included
- Talley Browning X-Bolt one-piece scope mount set
- Mounting hardware (6-48 screws)
- T-15 Torx wrench
Frequently Asked Questions
Which Browning X-Bolt rifles do these mounts fit?
This set is designed for Browning X-Bolt rifles with the short and super short action. It's purpose-built for that receiver, so it drops right on without needing a separate rail or base. If you're running a long or magnum action X-Bolt, you'll want the version made for that footprint instead.
What size scope will these Talley X-Bolt mounts hold?
These are built for a 30mm scope tube at the low ring height. The low height keeps your optic sitting close to the bore, which works well for most standard-size hunting scopes. Just make sure your scope's objective bell clears the barrel at the low setting before you commit.
Do I need to lap these mounts before installing?
No lapping is required. Talley machines these to tight tolerances so they're ready to install straight out of the box. In fact, lapping them will void the warranty, so just mount your scope and go.
What does the 20 MOA built into the rings actually do?
The 20 MOA cant tilts your scope slightly forward, which frees up extra elevation adjustment in your turret for shooting at longer distances. It's a nice advantage if you plan to stretch your X-Bolt out past typical hunting ranges. For closer-range or general-purpose use, a standard non-canted mount may suit you better.





Reviews
There are no reviews yet.