Description
Headspace is one of those things you can't eyeball, and getting it wrong on a rifle chamber affects both accuracy and safety. The Forster Headspace No-Go Gauge gives you a fast, repeatable way to check where a chamber sits. It represents the maximum headspace Forster recommends for gunsmiths chambering new bolt action rifles. If the bolt closes on it, that's your signal to dig deeper with a field gauge rather than assume the chamber is good to go.
What makes this one handy is its range. This single gauge works across a whole family of cartridges that share the same case head and shoulder dimensions, including .243 Winchester, .260 Remington, 7mm-08 Remington, .308 Winchester, .338 Federal, and .358 Winchester. So if you shoot or build on the .308 case, one gauge covers a lot of ground. The caliber and gauge type are printed right on the side, so there's no guessing which one you grabbed off the bench.
How the No-Go Gauge Fits Into Your Bench Routine
Forster gauges land between the GO and FIELD sizes in their three-length system. The GO checks minimum chamber dimensions, the No-Go marks the recommended upper limit for a fresh chamber, and the FIELD gauge confirms the longest safe headspace. Worth noting that Forster's No-Go is not cut to a SAAMI maximum spec. Closing on it doesn't automatically mean a chamber is out of tolerance, it just means it's time to verify with a field gauge before you trust it.
Why Gunsmiths Reach for the Forster No-Go
Each gauge is machined from A2 tool steel and held to tolerances within 0.00015 inches, which is why folks who care about measurement instruments trust them. Whether you're finish-reaming a new barrel or inspecting a used rifle before it goes back into rotation, this is the kind of tool that earns a permanent spot in the shop drawer. The No-Go length in particular is a go-to for anyone reaming new chambers who wants tight, accurate headspace.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG0243N
- UPC: 757253004346
- Style: No-Go Gauge
- Calibers Covered: .243 Win, .260 Rem, 7mm-08 Rem, .308 Win, .338 Federal, .358 Win
- No-Go Length: 1.634"
- Material: A2 Tool Steel
- Manufacturing Tolerance: Within 0.00015"
- Color: Steel
- Quantity: 1
- Shipping Weight: 0.0813 lb
What’s Included
- 1 Forster No-Go Headspace Gauge (HG0243N)
Frequently Asked Questions
What does it mean if my bolt closes on the Forster No-Go gauge?
If the bolt closes on the No-Go gauge, the chamber may still be within specifications, or it may have excessive headspace. The No-Go marks the maximum headspace Forster recommends for a freshly chambered rifle, not a SAAMI maximum. To know for sure whether the rifle is safe, check the chamber next with a field gauge.
Which calibers does this No-Go gauge work with?
This single gauge covers cartridges that share the same case head and shoulder family, including .243 Winchester, .260 Remington, 7mm-08 Remington, .308 Winchester, .338 Federal, and .358 Winchester. Since they all headspace off the same shoulder dimensions, one gauge handles the whole group. The caliber and gauge type are printed on the side so you always know which one you have.
What is the difference between a GO, No-Go, and Field gauge?
Forster offers three lengths per caliber, listed shortest to longest as GO, No-Go, and Field. The GO checks the minimum chamber dimension, the No-Go marks the recommended upper limit for a new chamber, and the Field gauge represents the longest safe headspace. Gunsmiths typically use the GO and No-Go when reaming a new barrel, then reach for the Field gauge to confirm an older or questionable chamber is still safe.
How precise is the Forster No-Go headspace gauge?
Each gauge is machined from A2 tool steel and held to tolerances within 0.00015 inches. That level of precision is why it's treated as a genuine measurement instrument rather than a rough reference tool. It gives you repeatable, trustworthy readings whether you're building a new rifle or inspecting a used one.



Reviews
There are no reviews yet.