Description
Every reloader hits that moment eventually. A charge weight that doesn't pan out, a seating depth you want to redo, or a batch of test rounds you no longer need. Instead of writing off those components, the Forster Standard Bullet Puller lets you take rounds apart and put the bullet, brass, and powder back into service. It threads into any standard press with a 7/8"-14 thread, so it drops right into the setup you already own.
How the Forster Bullet Puller Grips
This is a collet-style puller, and that's where it earns its keep. The collet clamps around the bullet, and here's the clever part: the pulling motion from your press actually tightens the grip as the bullet comes free rather than letting it slip. That sure hold means less marring on the bullet and a better shot at reusing everything. The Standard model, part number BP1010, has a tightening handle built right into the top of the body, so you can snug the collet down by hand without reaching for a wrench.
Picking the Right Collet for Your BP1010
The puller body handles bullets from 17 caliber all the way up to 458 caliber, but you'll need the collet that matches your bullet diameter. Collets are sold separately and are made from solid steel, sized specifically to your caliber. One thing worth knowing: bullet puller collets and case trimmer collets are not the same part, so grab the ones marked for the bullet puller.
Built to Outlast Your Press
Forster machines this tool from tough, dependable steel, and it's the kind of gear that gets handed down. Reloaders have reported using these for decades, and the design has stayed essentially the same for good reason. Note that the Standard BP1010 is meant for conventional threaded presses and is not intended for the Forster Co-Ax Press, which uses the Universal version instead.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BP1010
- UPC: 757253002946
- Type: Collet-Style Bullet Puller
- Press Thread Compatibility: 7/8"-14
- Caliber Range: 17 cal. to 458 cal.
- Collet Tightening: Built-in top handle (no wrench needed)
- Material: Steel
- Collets Included: No (sold separately)
- Co-Ax Press Compatible: No (use Universal model)
- Shipping Weight: 0.385 lb
What’s Included
- Forster Standard Bullet Puller body (BP1010)
Frequently Asked Questions
Does the Forster Standard Bullet Puller come with collets?
No, collets are sold separately with this listing. You'll need to buy the collet that matches your bullet diameter to pull that caliber. Keep in mind that bullet puller collets are different from case trimmer collets, so make sure you're grabbing the right ones.
What presses does the BP1010 work with?
The Standard Bullet Puller fits any press with a standard 7/8"-14 thread, which covers the vast majority of single-stage and turret presses on the market. It handles bullets from 17 caliber up to 458 caliber. It's not designed for the Forster Co-Ax Press, which uses the Universal version instead.
How is this different from the Forster Universal Bullet Puller?
The main difference is how you tighten the collet. The Standard BP1010 has a handle built into the top of the body so you can snug it down by hand, while the Universal model uses a hex top that needs a wrench and is set up for the Co-Ax Press. Both use the same Forster collets.
Will pulling a bullet damage it or ruin the powder?
The collet-style design grips the bullet firmly and the pull tightens that hold, which helps minimize marring so you can reuse the bullet. Your brass and powder come out intact and ready to reload as well. There's a bit of a feel to get down, but once you have it, the components salvage cleanly.




Reviews
There are no reviews yet.