0
0

Grace USA 7-Piece Steel Roll Pin Punch Set, 1/16″-7/32″ (RS-7)

UPC: 731940777003

$30.99

50 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Roll pins are their own animal, and a standard flat-face punch will crush or splay the ends before you ever get one seated right. The Grace USA 7-Piece Steel Roll Pin Punch Set solves that with a pilot point, the little ball on the tip that drops into the hollow center of the pin so it stays lined up and the wall of the pin and the hole stay intact. That single feature is why anyone doing serious trigger work, sight installs, or takedown on an AR-15 or 1911 ends up reaching for these instead of the generic punches in the drawer.

These are cut from high-carbon molybdenum tool steel, hardened the full length of the punch with a tempered striking end, and centerless ground for accuracy. Grace also machines a reverse taper behind the tip so the punch doesn't bind and stick in your work when you're driving a stubborn pin. The shafts are made from hex stock rather than round, which keeps them from rolling off the bench and gives you a steadier grip when you're lined up on something small.

What Sizes You Get in the Grace USA Roll Pin Set

The kit covers the small-diameter range that shows up most in firearms and small mechanical assemblies: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", and 7/32". That's the sweet spot for the vast majority of gunsmithing jobs. Each punch is stamped with its size and the Grace name, and it stays legible instead of wearing off after a few uses.

Made in the USA and Built to Stay in the Kit

Every punch in this Grace USA roll pin punch set is 100% made in the USA and carries three identifying machine marks so you can tell them apart from the regular pin punch series at a glance. They ship in a resealable vinyl pouch that keeps the set organized and travels well, whether it lives on the bench or rides in a range bag. It's the kind of set you buy once and keep using for decades.

Key Specifications

  • Manufacturer: Grace USA
  • Manufacturer Part Number: RS-7
  • UPC: 731940777003
  • Quantity: 7 punches
  • Size Range: 1/16" to 7/32"
  • Sizes Included: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32"
  • Material: High-carbon molybdenum tool steel
  • Tip Design: Pilot point (ball tip) with reverse taper
  • Shaft Stock: Hex (anti-roll)
  • Finish/Treatment: Hardened full length, tempered striking end, centerless ground
  • Storage: Resealable vinyl pouch
  • Country of Origin: USA
  • Style: Set
  • Shipping Weight: 0.685 lb

What’s Included

  • 1/16" roll pin punch
  • 5/64" roll pin punch
  • 3/32" roll pin punch
  • 1/8" roll pin punch
  • 5/32" roll pin punch
  • 3/16" roll pin punch
  • 7/32" roll pin punch
  • Resealable vinyl storage pouch

Frequently Asked Questions

What makes a roll pin punch different from a regular pin punch?

A roll pin punch has a small ball, or pilot point, on the tip that fits into the hollow center of the roll pin. That keeps the punch centered so it doesn't slip off and mushroom the pin end or scratch the hole. A regular flat-face punch has no way to locate on a roll pin, which is how a lot of pins get bent or crushed during install.

What sizes come in the Grace USA 7-piece roll pin punch set?

You get seven punches: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", and 7/32". That range covers most of the small-diameter roll pins you'll run into on firearms and small mechanical assemblies. Each punch is stamped with its size so you can grab the right one fast.

Are these Grace USA punches good for AR-15 and 1911 work?

Yes. This set is a favorite for trigger and sear pin work, sight installation, and general disassembly on platforms like the AR-15 and 1911. The pilot tips and hardened tool steel give you the control and durability you want when you're working around small parts you don't want to mar.

Where are the Grace USA roll pin punches made?

They're 100% made in the USA from high-carbon molybdenum tool steel, hardened the full length with a tempered striking end. Each punch also carries three identifying machine marks so you can tell the roll pin series apart from Grace's standard pin punches at a glance.

Additional information

UPC

731940777003

Manufacturer

Manufacturer Part Number

RS-7

Quantity

7

Shipping Weight

0.685

Style

Set

Reviews

There are no reviews yet.

Be the first to review “Grace USA 7-Piece Steel Roll Pin Punch Set, 1/16″-7/32″ (RS-7)”