Description
The Kick-Eez Dual Action All Purpose recoil pad is one of those upgrades you notice the very first time you touch off a round. Where a lot of pads just slow the recoil down, the Dual Action design goes after the energy itself. It runs two layers of Sorbothane instead of one, and the two work together: the soft first layer reacts fast to grab the initial jolt, then the second layer dissipates whatever's left so it never dumps straight into your shoulder. Kick-Eez rates their Sorbothane pads at up to 94% recoil reduction, and the material channels that energy out the sides of the pad rather than back into you.
What Sets the Dual Action Pad Apart
Sorbothane isn't rubber, and that's the whole point. It's a proprietary visco-elastic polymer that stays springy in cold and heat, holds its shape season after season, and won't bottom out under heavy loads. There are no hollow air pockets or metal plates buried inside, so the pad flexes naturally against your shoulder and gives you more room to grind it down. The face has a leather-grain texture and the black base keeps things clean and non-glare. It's made in the USA, which is nice to see on a part you're bolting to a gun you care about.
Sizing and Fit on Your Medium Stock
This is the medium 300 Series All Purpose profile at 1-1/8" thick, running roughly 5 1/4" long by 1 7/8" wide with standard 3-1/8" hole spacing that lines up with a huge range of shotgun and rifle stocks. The flat back and slightly canted ends make shouldering smooth whether you're mounting from a low gun position or a settled hold, so it works well across hunting, sporting clays, and general range time.
Grinding the Dual Action Pad to Fit
This is a grind-to-fit pad, so it screws onto your buttstock and then gets shaped to match your stock exactly. Keep your sander in the 1700 to 2500 RPM range and skip the high-speed Dremel, since Sorbothane doesn't like heat buildup. Start with 80 or 100 grit and rotate the pad as you go, then finish with 220 for a clean edge. Done right, it looks like it came from the factory and stays locked in place for the long haul.
Key Specifications
- Manufacturer: Kick-EEZ
- Manufacturer Part Number: DA 302-10-M-B
- UPC: 730412001554
- Series: 300 Series Dual Action All Purpose
- Size: Medium
- Thickness: 1-1/8"
- Dimensions: Approx. 5 1/4" L x 1 7/8" W
- Hole Spacing: 3-1/8" (standard)
- Material: Sorbothane visco-elastic polymer
- Construction: Dual-layer, grind-to-fit
- Face: Leather-grain texture
- Color: Black
- Mounting Style: Screw-on
- Recoil Reduction: Up to 94%
- Country of Origin: Made in USA
What’s Included
- Kick-Eez Dual Action All Purpose recoil pad, medium 1-1/8", black
Frequently Asked Questions
How is the Dual Action pad different from a regular Kick-Eez pad?
The Dual Action pad uses two layers of Sorbothane instead of one. The soft first layer reacts quickly to grab the initial recoil, then the second layer dissipates the leftover energy for maximum absorption. That two-stage design is what earns it the reputation as one of the most effective pads Kick-Eez makes.
Do I have to grind this pad to fit my stock?
Yes, this is a grind-to-fit pad, so it screws onto your buttstock and then gets shaped to match. Use a belt sander in the 1700 to 2500 RPM range with 80 or 100 grit to start, rotating the pad as you go, then finish with 220 grit. Avoid a high-speed Dremel since Sorbothane doesn't like heat buildup, and if you're not comfortable doing it yourself a gunsmith can knock it out quickly.
Will this medium 1-1/8" pad fit my shotgun?
It uses standard 3-1/8" hole spacing that lines up with a wide range of shotgun and rifle stocks, including popular Remington, Mossberg, Browning, Beretta, Winchester, and Savage models. Because it's a grind-to-fit pad, the flat back and generous footprint give you room to shape it to your exact stock. Just measure your current pad's hole spacing and stock width to confirm the medium size is the right starting point.
Is Sorbothane going to hold up over time?
Sorbothane is a visco-elastic polymer, not rubber, and it's built to keep its shape and flexibility through hot and cold conditions. There are no internal air pockets or metal plates to fail, and the material won't bottom out even under heavy recoiling loads. Treated right, it delivers years of dependable service.




Reviews
There are no reviews yet.