Description
The Trijicon ACOG 4x32mm LED (TA02) takes the battle-proven ACOG platform and hands you something the fiber-optic models don't: direct control over how bright your reticle glows. Instead of relying on ambient light, this version runs a green LED off a single AA battery, so you dial the illumination exactly where you want it. The green horseshoe dot sits over a .223/5.56 ballistic drop compensating reticle, giving you a fast both-eyes-open aiming point up close and holdover references for reaching out to distance.
What Sets the TA02 LED ACOG Apart
The brightness turret lives on the left side of the optic with settings one through six and an off position between each one, which means you can go from a dim indoor setting to full daylight visibility with a twist. Two of those settings are tuned for night vision, so the green horseshoe plays nice with NV gear without washing out your tube. On setting #4 you'll get over 12,000 hours of runtime, and the optic accepts common AA lithium or alkaline batteries you can find just about anywhere.
Built Like Every ACOG Should Be
Trijicon forges the housing from 7075-T6 aircraft-grade aluminum, then nitrogen-fills and seals it to stay fog-free and waterproof. This is the same rugged construction that made the ACOG the most-used magnified combat optic out there. It carries 4x fixed magnification over a 32mm objective, a 36.8-foot field of view at 100 yards, and 1.5 inches of eye relief. Adjustments move in 1/2 MOA clicks (2 clicks per inch at 100 yards) and hold zero through serious recoil.
Mounting the TA02 and Adding a Red Dot
It ships with the TA51 flattop thumbscrew mount that clamps right onto a Picatinny rail. One thing worth knowing: the TA02 body moves the top mounting bosses forward compared to the TA31 series, so if you want to piggyback an RMR up top, you'll need the correct front mount made for this optic. That forward placement is designed to maximize the red dot's performance alongside the ACOG. It's also compatible with most other 4×32 ACOG accessories.
Key Specifications
- Manufacturer: Trijicon
- Manufacturer Part Number: TA02-D-100392
- UPC: 719307308206
- Magnification: 4x fixed
- Objective Diameter: 32mm
- Reticle: Green Horseshoe Dot, .223 / 5.56 BDC
- Illumination Source: LED powered by 1x AA battery
- Brightness Settings: Six adjustable levels with off between each
- Battery Life: Over 12,000 hours on setting #4
- Eye Relief: 1.5 in. (38.1mm)
- Field of View: 7 degrees, 36.8 ft. at 100 yds
- Exit Pupil: 8mm
- Adjustment: 1/2 MOA, 2 clicks per inch at 100 yards
- Housing: Forged 7075-T6 aircraft-grade aluminum
- Mount: TA51 Flattop Thumbscrew Mount (Picatinny)
- Country of Origin: Made in USA
What’s Included
- Trijicon ACOG 4×32 LED Riflescope (TA02)
- TA51 Thumbscrew Flattop Adapter Mount
- AA Battery
- TA56 LensPen
- TA71E Lanyard Assembly for Adjuster Caps
- Lanyard Assembly for Battery Cap
- PR15 Trijicon Logo Sticker
- ACOG Manual
- Warranty Card
Frequently Asked Questions
What battery does the Trijicon ACOG 4×32 LED use and how long does it last?
The TA02 runs on a single AA battery, either lithium or alkaline, which makes resupply easy since those are sold everywhere. On brightness setting #4 you'll get over 12,000 hours of continuous runtime. The reticle is powered entirely by the LED rather than ambient light, so you keep full control of illumination day or night.
Is the green horseshoe dot reticle good for close range and distance?
Yes. The open green horseshoe gives you a fast, both-eyes-open aiming point for close-quarters work using Trijicon's Bindon Aiming Concept. The center dot and the ballistic drop compensating marks below it provide holdover references for the .223/5.56 round at longer distances, so one reticle covers both ends of the spectrum.
Can you mount an RMR on top of the TA02 LED ACOG?
You can, but the TA02 body moves the top mounting bosses forward compared to the TA31 series, so you'll need the specific front mount made for this optic rather than a rear-mount setup. That forward placement is intentional and is designed to maximize the red dot's performance alongside the ACOG. The RMR, mount, and tools for that setup are not included with this scope.
Is the Trijicon ACOG 4×32 LED night vision compatible?
It is. Two of the six brightness settings are tuned for use with night vision devices, so the green horseshoe won't wash out your tube. The optic is also compatible with most other 4×32 ACOG accessories on the market.





Reviews
There are no reviews yet.