0
0

Wheeler FAT Stix Limiter 40 in-lb Preset Torque Tool | 1192770

UPC: 661120747208

$18.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Getting torque right is one of those things that separates a rifle that holds zero from one that shifts on you at the worst possible moment. The Wheeler FAT Stix Limiter in 40 in-lb takes the feel and the finger-crossing out of the equation. It's a single preset torque limiter, factory-set to 40 inch-pounds, that snaps onto a 1/4-inch driver and stops you right at spec so you're not guessing whether that screw is tight enough or already stripped.

How the FAT Stix Limiter 40 in-lb Fits Into Your Setup

This limiter is compatible with the Wheeler FAT Stix T-Handle Driver or any other driver that accepts standard 1/4-inch hex bits, so it slots right into gear you probably already own. The reversible design lets you both tighten and loosen fasteners without hurting the limiter itself. It works like a screwdriver rather than a ratchet, and once you feel it give at the preset value, you know the job's done. A lot of folks like the T-handle for the extra grip and control, but the beauty here is you're not locked into one handle.

Where 40 in-lb Earns Its Keep

Scope ring and base screws usually live in the 15 to 35 in-lb range, so this 40 in-lb stick steps up for the heavier stuff: action screws, sturdier accessory mounts, and other fasteners that call for a firmer bite. Rated accurate within +/-5%, it keeps you inside manufacturer torque specs without the drift you get from an adjustable wrench that someone forgot to reset. And it's not firearm-only either. It'll handle bikes, small machinery, and any fastener that needs a repeatable, known torque value.

No Calibration, No Second-Guessing

There's nothing to adjust, nothing to zero out, and nothing to remember before you toss it in a range bag or bench drawer. It's part of a full lineup running from 10 up to 65 in-lb in 5-pound steps, so building out a spread for different jobs is easy. Simple, compact, and purpose-built to protect your fasteners and your gear.

Key Specifications

  • Preset Torque Value: 40 in-lb
  • Accuracy: +/-5%
  • Style: Torque Limiter
  • Drive Compatibility: 1/4-inch hex bits / FAT Stix T-Handle Driver
  • Design: Reversible, no adjustment required
  • Manufacturer: Wheeler Engineering
  • Manufacturer Part Number: 1192770
  • UPC: 661120747208
  • Shipping Weight: 0.345 lb

What’s Included

  • Wheeler FAT Stix Limiter, 40 in-lb (single preset limiter)

Frequently Asked Questions

What does the FAT Stix Limiter 40 in-lb work with?

It's built for the Wheeler FAT Stix T-Handle Driver, but it'll fit any driver that accepts standard 1/4-inch hex bits. That means you can pair it with a T-handle, a bit driver, or other tools you likely already have on the bench. You supply the bit that matches your fastener.

Do I need to calibrate or adjust this limiter?

No. Each FAT Stix Limiter comes factory-preset to a single torque value, in this case 40 inch-pounds, with nothing to dial in. You just install your bit and tighten until the limiter releases at spec, which makes it grab-and-go for both field and shop use.

Can I use the FAT Stix Limiter to loosen screws too?

Yes. The reversible design lets you tighten and loosen fasteners without damaging the limiter. Keep in mind it functions like a screwdriver rather than a ratchet, so you're working in one motion at a time.

Is 40 in-lb the right value for scope rings?

Most scope ring and base screws fall in the 15 to 35 in-lb range, so 40 in-lb is generally a step above typical optic mounting specs. It's better suited to action screws and heavier accessory mounts. Always check the torque figure your ring, base, or component manufacturer recommends and match the limiter to it.

Additional information

UPC

661120747208

Manufacturer

Manufacturer Part Number

1192770

Shipping Weight

0.345

Style

Torque Limiter

Reviews

There are no reviews yet.

Be the first to review “Wheeler FAT Stix Limiter 40 in-lb Preset Torque Tool | 1192770”