0
0

Wheeler 1-Piece Scope Mount Rem 700 LA 1″ High 20 MOA Black

UPC: 661120079354

$78.99

9 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Mounting a scope on your Remington 700 shouldn't feel like a gamble, and this Wheeler 1-Piece Scope Mount takes the second-guessing out of it. The base and 1" rings are machined as a single piece from 6061 aluminum, so you get one rigid platform instead of a stack of parts that can shift under recoil. The matte black anodized finish keeps glare down in the field and shrugs off scuffs and weather. It's set up for the Remington Model 700 Long Action, and the same design family covers 700 Short Action and Savage 10/110 receivers.

What the 20 MOA Cant Does for You

The built-in 20 MOA of elevation is the standout here. That forward slope gives your scope's internal adjustment a head start, so when you're reaching way out there you've got plenty of elevation left in the turret instead of running out of travel. For anyone shooting past a few hundred yards or running a long-range setup, that extra room matters. If you're zeroing at closer distances, it's worth knowing the cant is designed with reach in mind.

Getting Your Optic Level with the Wheeler 1-Piece Mount

Each ring uses a six-screw cap, which spreads the clamping force evenly around your scope tube and helps keep everything locked in place round after round. The real time-saver is the swing-out anti-cant level that flips up off the ring during setup, letting you get your reticle truly level before you torque things down. When you're done, it folds right out of the way. The one-piece layout also makes the whole job quicker since there's no fussing with aligning separate front and rear bases.

Fit Notes for the Rem 700 LA Mount

This version is built around 1" scope tubes in a high ring height, which gives good clearance for larger objective bells. It mounts directly to the receiver using the factory 6-40 screw holes, so there's no rail to add first. Worth checking before you order: it won't fit actions drilled and tapped for 8-40 screws, and on the Savage side the included 6-48 screws fit pre-2020 models.

Key Specifications

  • Manufacturer: Wheeler Engineering
  • Manufacturer Part Number: 1110072
  • UPC: 661120079354
  • Fits: Remington 700 Long Action (also 700 SA / Savage 10/110 platform)
  • Ring Size: 1 inch
  • Ring Height: High
  • Elevation Cant: 20 MOA
  • Material: 6061 Aluminum
  • Finish: Matte Black Anodized
  • Ring Design: 6-Screw Cap
  • Base Screws: 6-40
  • Style: Direct Mount, One-Piece
  • Leveling Aid: Integrated Swing-Out Anti-Cant Level
  • Length: 8.55 in
  • Weight: 0.54 lb

What’s Included

  • Wheeler 1-piece scope mount with integral 1" rings
  • Six-screw ring caps and mounting hardware
  • Integrated swing-out anti-cant level

Frequently Asked Questions

Will the Wheeler 1-piece mount fit my Remington 700 Long Action?

Yes, this version is built specifically for the Remington Model 700 Long Action and attaches directly to the receiver using the factory 6-40 screw holes. The same one-piece design also covers 700 Short Action and Savage 10/110 receivers in the broader lineup. Just make sure your action isn't drilled and tapped for 8-40 screws, since this mount uses 6-40.

What does the 20 MOA cant actually do?

The 20 MOA built into the base tilts your scope slightly forward, which gives you extra elevation travel in your turret for shooting at longer distances. It's a big help if you're running a long-range setup and don't want to run out of adjustment when dialing for drop. For shorter-range use it still works fine, it's just geared toward reaching out.

Does this mount take 1 inch or 30mm scopes?

This model is made for 1" scope tubes and comes in a high ring height. The high profile gives you solid clearance for scopes with larger objective bells. If you're running a 30mm or 34mm tube, Wheeler offers those ring sizes in the same one-piece family.

How hard is it to install and level a scope on this mount?

The one-piece design makes installation straightforward since there's no aligning separate front and rear bases. The swing-out anti-cant level flips up during setup so you can get your reticle level before torquing the six-screw caps down, then it folds out of the way. A basic set of screwdriver bits and a torque wrench is all you need to get it mounted right.

Additional information

UPC

661120079354

Manufacturer

Manufacturer Part Number

1110072

Length

8.5500

Shipping Weight

0.54

Style

Direct Mount

Reviews

There are no reviews yet.

Be the first to review “Wheeler 1-Piece Scope Mount Rem 700 LA 1″ High 20 MOA Black”