Description
Getting a scope mounted straight and solid can make or break your accuracy, and this one-piece Wheeler mount is designed to take the headache out of that job. Machined from 6061 aluminum and finished in a matte black anodized coating, it bolts right onto a Savage 10 short action or 110 long action receiver and gives your 34mm optic a rock-steady home. The 20 MOA of built-in elevation means you've got extra adjustment room in your scope's turret for reaching way out there, which is exactly what you want when you're stretching the distance.
What Sets the Wheeler 34mm Scope Mount Apart
The standout here is the flip-out anti-cant level. It swings out of the way when you don't need it and pops up when you're mounting your scope, so you can get everything perfectly level without chasing a separate bubble level around the bench. You can position it on the front or rear ring depending on how your setup is laid out, which is a nice touch for working around turrets and objective bells.
Build and Fit on the Wheeler 1-Piece Mount
Each ring uses a six-screw cap design, and that extra clamping force keeps heavy optics from shifting under recoil. Being a single-piece unit, you don't have to fuss with aligning two separate bases, which cuts down on scope stress and makes the whole install faster. Medium ring height clears most standard objective bells while keeping your cheek weld comfortable and your eye naturally lined up behind the glass.
One thing worth knowing on the Savage side: this mount is set up for the round-receiver Savage 10/110, and the Savage screw hardware matches the 6-48 pattern used on pre-2020 receivers, so double-check your action if you've got a newer gun. For folks running a Remington 700 pattern, Wheeler builds this same mount in that fitment too.
Key Specifications
- Manufacturer: Wheeler Engineering
- Manufacturer Part Number: 1108724
- UPC: 661120079200
- Tube Diameter: 34mm
- Ring Height: Medium
- Elevation / Cant: 20 MOA
- Material: 6061 Aluminum
- Finish: Anodized Matte Black
- Ring Design: 6-Hole (6-Screw) Caps
- Style: One-Piece Direct Mount
- Rifle Fit: Savage 10 Short Action / 110 Long Action
- Included Accessory: Flip-Out Anti-Cant Level
- Shipping Weight: 0.525 lb
What’s Included
- Wheeler 1-piece 34mm scope mount
- Flip-out anti-cant level
- Ring cap screws
Frequently Asked Questions
What rifles does this Wheeler 34mm mount fit?
This model is built for the Savage 10 short action and 110 long action receivers. It's a one-piece direct mount that bolts to the round Savage receiver. If you have a 2020 or newer Savage, check your screw pattern first, since the Savage hardware matches the older 6-48 layout.
How does the anti-cant level work on this scope mount?
The mount has a small bubble level that flips out when you're mounting your scope and folds back when you're done. It lets you get the reticle perfectly level with the rifle without needing a separate leveling tool. You can mount it on either the front or rear ring to work around your scope's turrets and objective.
What does the 20 MOA of elevation do for me?
The 20 MOA built into the base angles your scope slightly downward, which frees up more of your turret's internal elevation travel for longer shots. It's a popular choice for anyone shooting at extended ranges who wants to keep dialing without topping out their scope's adjustment. For typical hunting distances it also leaves plenty of room to zero.
Will this fit a 34mm scope tube and is the medium height right for me?
Yes, the rings are sized for a 34mm main tube, which is common on larger long-range optics. Medium height clears most standard objective bells while keeping a comfortable, natural cheek weld. If you're running a very large objective lens you may want to compare against the taller height options Wheeler offers in this line.





Reviews
There are no reviews yet.