$122.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Redding Carbide Pro Series Die Set in 10mm Auto is put together for reloaders running progressive machines who want clean, consistent brass without babysitting every stroke. Redding leaned on their NxGEN carbide sizing technology here, which does a great job of sizing the case for tight chamber conformity while stretching the life of your brass. Because the sizing die uses a carbide ring, you can skip case lube entirely on your 10mm brass, which keeps your press and your bench a lot cleaner over long loading sessions.
This set is designed specifically for progressive reloading, so it leaves the expander die out of the box on purpose. Most popular progressive presses expand the case mouth right at the powder drop station, so a standalone expander would just be taking up a slot you need. Every die in the set has an oversized entry radius at the mouth, which funnels cases in smoothly even when the press is indexing fast. That detail matters more than it sounds, since tipped bullets and crushed cases are the usual headaches when you speed things up.
Rather than combining functions, the Pro Series splits seating and crimping into their own operations. The seating die is built for bullet seating only with no crimp interference, and a separate crimp die handles that step at its own station. For 10mm Auto, which headspaces on the case mouth, that means a taper crimp for proper bullet retention. Doing it this way tends to give you more repeatable overall length and better bullet tension, which shows up on the target.
While the 10mm Pro Series set shines on progressive equipment, it works well on a single-stage or turret press if you pick up a Redding expander die separately. Keep in mind a shellholder is sold on its own, so grab the correct one for 10mm if you don't already have it in your kit. For anyone loading 10mm in volume, this is a durable, thoughtfully built set from a name that's earned its reputation in the reloading world.
No, and that's by design. This set is built for progressive presses, which expand the case mouth at the powder drop station, so a separate expander isn't needed. If you plan to run it on a single-stage or turret press, you can purchase a Redding expander die separately.
You do not. The NxGEN carbide sizing die lets you resize 10mm brass without any case lubricant, which keeps your press cleaner and speeds up high-volume sessions. Carbide also helps extend the life of your brass over time.
Splitting the two operations gives you more consistent bullet seating and better control over crimp tension. The seating die handles depth with no crimp interference, and the dedicated taper crimp die does its job at its own station. That separation usually translates to more repeatable overall length and tighter groups.
No, the shellholder is sold separately. You'll want to pick up the correct Redding shellholder sized for 10mm Auto if you don't already have one in your setup.
| UPC | 611760895203 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 89520 |
| Shipping Weight | 1.5 |
You must be logged in to post a review.
Reviews
There are no reviews yet.