0
0

RCBS Full-Length Die Set – 22 Creedmoor 2-Die (10101)

UPC: 604544674958

$96.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 22 Creedmoor has quickly earned a spot as one of the flat-shooting, high-BC .224 rounds worth loading yourself, and this RCBS two-die set gives you the two tools that get the job done. You get a full-length sizing die with an expander-decapping unit and a seater die with a bullet seater plug, all built to bring your brass back to spec and seat bullets clean. Because the 22 Creedmoor is necked down from the 6.5 Creedmoor case, plenty of loaders use the sizing die to form brass from 6mm or 6.5 Creedmoor parent cases, though dedicated 22 Creedmoor brass is now widely available too.

What the 22 Creedmoor Die Set Does on the Press

The full-length sizer resizes the outside of the case, de-primes it, and expands the neck to grip the next bullet, bringing everything to SAAMI minimum cartridge dimensions for dependable chambering. Vent holes in the die let trapped air and excess lube escape so you avoid dented shoulders, and headspace is held tight to keep case body length consistent through repeated firings. The seater die includes a built-in roll crimper, so you can seat and crimp in one stroke if your load calls for it, or back the crimp off entirely for precision work.

Fit and Build of the RCBS 22 Creedmoor 2-Die Set

Both dies wear the standard 7/8"-14 thread, so they'll thread right into a Rock Chucker or just about any other single-stage or turret press you've got on the bench. RCBS machines these from their proprietary die steel and finishes them to exacting tolerances, and the whole set is covered by the RCBS limited lifetime warranty against defects in materials and workmanship. Keep some case lube handy for sizing, run your expander ball smooth for consistent neck tension, and this set will crank out accurate 22 Creedmoor ammo for years.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 10101
  • UPC: 604544674958
  • Caliber: 22 Creedmoor
  • Die Type: Full-Length 2-Die Set
  • Configuration: Full-Length Sizing Die + Bullet Seating Die
  • Thread Size: 7/8"-14
  • Material: RCBS Proprietary Die Steel
  • Group: D (Bottleneck Rifle Cartridges)
  • Crimp: Built-in roll crimper in seater die
  • Warranty: RCBS Limited Lifetime
  • Length: 5.9 in
  • Shipping Weight: 1.24 lb

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug and built-in roll crimper
  • Green RCBS die storage box

Frequently Asked Questions

Can I form 22 Creedmoor brass from 6.5 or 6mm Creedmoor cases with this die set?

Yes. Since the 22 Creedmoor is a necked-down 6.5 Creedmoor, the full-length sizing die is commonly used to form brass by running 6mm or 6.5 Creedmoor cases through it with plenty of case lube. Dedicated 22 Creedmoor brass from makers like Hornady, Peterson, and Alpha is also readily available now if you'd rather skip the forming step.

Will this RCBS 22 Creedmoor die set fit my press?

It should. Both dies use the standard 7/8"-14 thread, which fits the RCBS Rock Chucker along with the vast majority of single-stage and turret presses on the market. If your press takes standard dies, you're good to go.

Does the seating die crimp the bullet?

The seater die has a built-in roll crimper, so it can seat and crimp in the same stroke if your load benefits from it. For precision or long-range loads, most reloaders back the crimp all the way out and just seat, which is easy to do by adjusting the die.

What does the full-length sizing die actually do to my brass?

It resizes the outside of the case, removes the spent primer, and expands the neck to accept the next bullet, bringing everything back to SAAMI minimum cartridge dimensions. Vent holes let trapped air and lube escape to prevent dented shoulders, and tight headspace tolerances keep case dimensions consistent. Just remember to lube your cases before sizing.

Additional information

UPC

604544674958

Manufacturer

Manufacturer Part Number

10101

Caliber/Gauge

22 CREEDMORE

Length

5.9000

Product Type

FULL LENGTH

Shipping Weight

1.24

Reviews

There are no reviews yet.

Be the first to review “RCBS Full-Length Die Set – 22 Creedmoor 2-Die (10101)”