Description
The Burris XTB-700 SA Xtreme Tactical base gives your Remington 700 Short Action a stiff, dependable platform to build a precision rig on. It's milled from one solid piece of steel, so there's no two-piece alignment to fuss with and no flex to rob you of consistency. The matte black finish keeps it low-key on the rifle and ties in nicely with just about any setup.
The standout here is the 25 MOA cant built right into the base. That forward slope borrows elevation from your scope's internal adjustment range, which means you've got more clicks left over for dialing long-range dope instead of running out of travel halfway to your target. For anyone shooting past a few hundred yards or running a scope that's hungry for elevation, that extra 25 MOA is the difference between reaching out comfortably and fighting your turret.
What the XTB-700 SA Base Fits
This particular model is cut for the Remington 700 Short Action footprint, and the same pattern is shared by several Savage and Ruger American short actions that use that bolt-pattern layout. It's a one-piece Weaver/Picatinny-style rail, so it plays nice with all standard Weaver and Picatinny rings. That gives you plenty of room to position your rings fore and aft for proper eye relief and ring spacing.
Getting the Burris Xtreme Tactical Base Dialed In
Mounting is straightforward with the included screws. Burris lists a base torque of 30 inch-pounds, so a quality torque wrench and a dab of thread locker will have this thing locked down and staying put under recoil. Steel construction means it shrugs off hard use and holds zero round after round. If you're setting up a long-range hunting or target build on a short-action 700, this is a clean, no-nonsense foundation that lets your optic do its job.
Key Specifications
- Manufacturer: Burris
- Model: XTB-700 Short Action
- Manufacturer Part Number: 410653
- UPC: 000381106537
- Cant: 25 MOA
- Base Type: One-Piece Weaver / Picatinny-Style
- Material: Solid Steel
- Finish: Matte Black
- Fits: Remington 700 Short Action
- Base Torque: 30 inch-lbs
- Ring Compatibility: Weaver-style and Picatinny-style rings
- Shipping Weight: 0.4 lb
What’s Included
- Burris XTB-700 SA Xtreme Tactical one-piece base
- Mounting screws
Frequently Asked Questions
What rifle does the Burris XTB-700 SA base fit?
This base is cut for the Remington 700 Short Action receiver footprint. Several Savage and Ruger American short actions share that same bolt-pattern layout, so it works for those as well. Always confirm your receiver's hole spacing matches the short-action pattern before ordering.
What does the 25 MOA cant on this base do?
The 25 MOA cant is a built-in forward slope that gives your scope extra elevation adjustment for long-range shooting. Instead of running out of internal travel when you dial for distance, the base hands you more usable elevation. It's a big help for extended-range target and hunting setups.
Will my Picatinny rings work with the Burris Xtreme Tactical base?
Yes. This is a one-piece Weaver/Picatinny-style rail, so it accepts all standard Weaver-style and Picatinny-style rings. You'll have room to space your rings for proper eye relief and ring placement.
How tight should I torque the XTB-700 SA base to the receiver?
Burris specs the base screws at 30 inch-pounds. A quality torque wrench and a little thread locker will keep everything locked down and holding zero under recoil. Avoid overtightening, since the listed value is plenty for steel on steel.




Reviews
There are no reviews yet.