Description
Mounting a scope on a hard-recoiling revolver or single-shot pistol is a whole different animal than setting up a rifle, and the Burris 2-7x32mm Handgun Scope is purpose-built for that job. The big draw here is eye relief. You get roughly 11 to 21 inches of it, which is exactly what you need when you're shooting at arm's length with a magnum caliber. That extended relief means you can hold the pistol out naturally and still pick up a full, clear sight picture without worrying about the scope coming back at you under recoil.
The optical system runs Burris Hi-Lume index-matched multi-coated lenses, which do a solid job pulling in light and cutting glare when the sun's low and the deer are moving. You're getting a 2x to 7x zoom range off a 32mm objective, so the low end gives you a wide field of view for quick target acquisition up close, and the 7x top end stretches your effective range when you need to reach out. The reticle is the simple Plex design, a clean crosshair that thickens toward the edges to draw your eye to center without cluttering the view.
What Makes the Nickel 2-7x32mm Handgun Scope Hold Up
This is a one-piece 1-inch tube built from aluminum alloy with a scratch and corrosion-resistant nickel finish that matches up nicely with stainless and silver-finished handguns. Inside, a double internal spring-tension system keeps the scope holding zero through the kind of shock, recoil, and vibration that big-bore handguns dish out. The tube is nitrogen-filled and sealed, so it stays waterproof and fogproof whether you're hunting in the rain or coming in from the cold.
Dialing In the Burris Handgun Scope
Adjustments are 1/4 MOA per click with a total of 64 MOA of windage and elevation travel, handled through capped low-profile hunter-style turrets that keep the profile sleek and protected in the field. At right around 13 ounces and 9.7 inches long, it won't throw off the balance of your pistol. The whole package is backed by the Burris Forever Warranty, which is about as good as it gets in the optics world.
Key Specifications
- Manufacturer: Burris
- Manufacturer Part Number: 200298
- UPC: 000381002938
- Magnification: 2-7x
- Objective Lens Diameter: 32mm
- Reticle: Plex (Second/Rear Focal Plane)
- Finish: Nickel (Silver)
- Main Tube Size: 1 inch
- Eye Relief: 11 – 21 in.
- Field of View @ 100 yds: 21 ft at 2x, 7 ft at 7x
- Click Value: 1/4 MOA
- Windage/Elevation Adjustment: 64 MOA total
- Turret Style: Capped Hunter
- Length: 9.7 in.
- Weight: 13 oz.
- Waterproof/Fogproof: Yes, nitrogen-filled
What’s Included
- Burris 2-7x32mm Handgun Scope (Nickel, Plex Reticle)
- Lens caps
- Owner's manual
- Burris Forever Warranty
Frequently Asked Questions
What handguns is the Burris 2-7x32mm Handgun Scope designed for?
This scope is built for scoped hunting handguns like single-shot pistols and large-caliber revolvers, including magnum platforms chambered in rounds like .44 Mag and similar. The extended eye relief of 11 to 21 inches is the key, since it lets you shoot at arm's length and still get a full sight picture. It's a popular pick for handgun hunters running big-bore wheel guns.
Does the nickel Burris Handgun Scope have the Ballistic Plex or the standard Plex reticle?
Model 200298 comes with the standard Plex reticle, not the Ballistic Plex. The Plex is a clean crosshair that thickens toward the outer edges to pull your eye to center. If you specifically want the trajectory-compensating Ballistic Plex, that's offered on other models in the Burris handgun lineup.
Will the Burris 2-7x32mm hold zero on a hard-recoiling handgun?
Yes, it's engineered for exactly that. The double internal spring-tension system is designed to hold zero through the shock, recoil, and vibration that big-bore handguns generate. Keep in mind this nickel model does not include Posi-Lock, which is a separate feature found on certain other variants in the family.
What size scope rings do I need for this Burris handgun scope?
It uses a one-piece 1-inch main tube, so you'll want 1-inch rings or a 1-inch mount matched to your handgun's base or rail. Because the objective is only 32mm, low to medium height rings usually work well and keep the optic sitting close to the bore. Pick a mount rated for the recoil of your specific pistol.




Reviews
There are no reviews yet.