Description
Built around Leofoto's ST-X platform, the ST-323CX is a purpose-driven support system for precision shooting and glassing in the field. The three-section carbon fiber legs use ten layers of Toray carbon, so you get real rigidity without lugging around dead weight. It stretches from a working height of 6.30 inches all the way up to 64.60 inches, which covers everything from prone barricade work to standing shots off a tall position. Folded down to about 29.4 inches, it slides into a pack or the padded case that comes with it.
What Sets the ST-323CX Apart
The headline feature is the integrated lever-control ball head paired with the redesigned hybrid clamp. That clamp swallows both Arca-Swiss and Picatinny rails, and the adjustable width means it'll still lock down tight on rails that run a hair off standard spec. You get smooth, fast repositioning with a single lever, which matters when a target moves or you need to transition between positions in a hurry.
Stability Where It Counts
Leofoto rated this one at a max load of roughly 55 pounds, so it has no trouble holding a full-length rifle chassis, a heavy spotter, or a large-format camera setup. Three angle-stop positions and independent leg spread let you plant it solid on uneven ground, off a bank, or down low in the dirt. The offset leg joints route bending and torsion loads through the strongest parts of the frame, and the oversized rubber feet bite into just about any surface while keeping the leg sidewalls off the ground even at the lowest splay.
Little Things That Add Up on the ST-323CX
The new X-version angle stop uses a knurled-bar design you can work one-handed, which is a genuine time-saver when your other hand is busy on the gun. There's also a 1/4-20 accessory socket on the side of the apex for hanging a strap, a magic arm, or other add-ons. Between the compact fold, the balanced weight, and the padded case, this is a setup that's easy to grab and go without leaving stability behind.
Key Specifications
- Manufacturer: Leofoto USA
- Manufacturer Part Number: ST-323CX
- UPC: 6940828313057
- Color: Black
- Leg Material: 10-Layer Toray Carbon Fiber
- Working Height Range: 6.30 in to 64.60 in
- Folded Length: 29.4 in (746 mm)
- Leg Sections: 3
- Max Load Capacity: 55 lb (25 kg)
- Head: Integrated Lever-Control Ball Head
- Clamp: Hybrid Arca-Swiss & Picatinny Lever-Release
- Angle Stop Positions: 3
- Accessory Socket: 1/4"-20 on apex side
What’s Included
- ST-323CX ST-X tripod with integrated lever-control ball head
- Hybrid Arca/Picatinny lever-release clamp
- Padded carrying case
Frequently Asked Questions
What can the Leofoto ST-323CX actually hold?
It carries a max load of roughly 55 pounds, so a full-length rifle chassis, a heavy spotting scope, or a large-format camera rig are all fair game. The ten-layer carbon fiber legs and offset leg joints keep it rigid even under real weight. It's overbuilt enough that you won't be worrying about your setup while you're behind the glass.
Does the ST-323CX clamp work with both Arca and Picatinny rails?
Yes. The redesigned lever-release clamp is a hybrid system that takes both Arca-Swiss and Picatinny interfaces. The adjustable width also lets it lock down on rails that run slightly off standard spec, so you're not stuck if your rail isn't perfect.
How compact is the ST-323CX for packing out?
It folds down to about 29.4 inches and ships with a padded case built with extra room for the ball head. Combined with the balanced weight and small apex footprint, it's an easy one to strap to a pack for backcountry glassing or a range day.
What are the angle stops on the ST-323CX for?
The three angle-stop positions plus independent leg spread let you set each leg differently for uneven ground, low prone positions, or shooting off a bank. The new X-version knurled-bar stops can be worked with one hand, which is handy when your other hand is on the rifle.


Reviews
There are no reviews yet.