$35.99
Out of stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Going free-float is one of the best bang-for-your-buck upgrades you can make to an AR-15, and the TacFire 15" M-LOK handguard hits that sweet spot of length, weight, and price. At 15 inches it stretches right out toward the muzzle on a carbine or rifle-length setup, giving you room to run a light, laser, bipod, or hand stop wherever your grip likes them. The slim 1.5" outer profile keeps things comfortable in the hand instead of feeling like you're wrapping your fingers around a soda can.
Since this is a free-float design, the handguard mounts to the barrel nut and never touches the barrel itself. That means nothing you hang off the rail puts pressure on the barrel, so your point of impact stays consistent shot after shot. It's the same principle the precision crowd relies on, brought down to a working man's price. The full-length top Picatinny rail runs flush with a flat-top upper, so co-witnessing irons or mounting an optic and backup sights stays simple.
TacFire machines this one from 6061-T6 aluminum and finishes it with a Class-2 Type III black hard anodized coating done to MIL-A-8625 standards. Translation: it shrugs off scuffs, holds up to heat, and won't wear through the first time you set it down on concrete. It ships with a steel barrel nut, and the M-LOK slots run along the sides and bottom plus angled positions around the circumference so you're not boxed into one mounting plane.
Inner diameter comes in at 1.3" with a 0.3" gas block clearance channel, so it clears a standard low-profile gas block without a fight. Install does call for an armorer's wrench and a torque wrench to seat the barrel nut properly, so if you're not comfortable turning your own wrenches, a gunsmith can knock it out quickly.
It's built for standard AR-15 platforms and mounts to the barrel nut that comes with it, so it works with mil-spec flat-top uppers. It clears a low-profile gas block thanks to the 0.3" gas block channel, but it won't fit over a front sight base or a large-diameter gas block. Plan on running a low-profile block if you're not already.
At 15 inches it covers carbine, mid-length, and rifle-length gas systems as long as you're using a low-profile gas block that tucks under the rail. The full-length top rail lines up with your upper for mounting sights and optics. Just double-check that your gas block sits inside the 1.3" inner diameter before you order.
It ships with the steel barrel nut and a hex wrench for the mounting hardware. You'll still want an armorer's wrench and a torque wrench to seat and torque the barrel nut correctly, which are the same tools any free-float install calls for. If you don't have those on the bench, a gunsmith can install it in short order.
A free-float rail attaches only to the barrel nut and never contacts the barrel, so slinging up, resting on a bipod, or pressing against a barricade won't shift your point of impact. That translates to more consistent accuracy than a traditional drop-in that clamps to the barrel. It's a common accuracy upgrade that also opens up far more accessory mounting space.
| UPC | 729205618253 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | HG2515 |
| Shipping Weight | 1.115 |
You must be logged in to post a review.
Reviews
There are no reviews yet.