Description
Adding a quick-detach sling to a thin-walled polymer or hollow stock has always been the tricky part, since there isn't enough material to hold a standard threaded base on its own. That's exactly the gap the GrovTec Non-Rotating Flanged Base fills. It gives you a rigid, non-rotating anchor for any GrovTec push-button swivel, so your sling stays put instead of twisting around every time you shoulder the rifle or sling it over your back.
How the GrovTec Non-Rotating Flanged Base Locks In
Rather than relying on threads biting into thin stock walls, this base clamps down with three set screws and backs it up with an included retainer nut on the inside of the stock. That combination spreads the load and keeps the base from working loose under the weight of a loaded rifle and sling. The non-rotating design is the real draw here, because a swivel that can't spin means a tactical sling that won't roll up on you at the worst moment.
Build and Finish on the Flanged Base
GrovTec builds these out of steel for the strength you want at a load-bearing sling point, and the black finish keeps it low-glare and unobtrusive on the stock. The company runs on a lifetime warranty and a made-in-Oregon reputation for tight tolerances, and that shows up in hardware like this that's meant to be installed once and forgotten about. Owners of these hollow-stock bases consistently point to solid fitment and a swivel that holds where it should.
Getting the Base On Your Rifle
Installation is straightforward for anyone comfortable with basic hand tools. You seat the flanged base into the stock, snug the three set screws, and lock everything down with the retainer nut from inside. Once it's in, you've got a permanent QD-style socket ready for a push-button swivel, turning a factory hollow stock into a real sling-ready setup without butchering the rifle.
Key Specifications
- Manufacturer: GrovTec
- Manufacturer Part Number: GTHM196
- UPC: 850001279161
- Product Type: Push-Button Swivel Base / Adaptor
- Design: Non-Rotating Flanged Base
- Intended Use: Hollow / thin-walled stocks
- Mounting: 3 set screws plus retainer nut
- Material: Steel
- Color / Finish: Black
- Length: 5.5 in
- Swivel Compatibility: GrovTec push-button swivels
What’s Included
- GrovTec Non-Rotating Flanged Base
- Three set screws
- Retainer nut
Frequently Asked Questions
What kind of stock is the Non-Rotating Flanged Base made for?
It's built specifically for hollow or thin-walled stocks that don't have enough material to hold a standard threaded push-button base. The set screws and internal retainer nut give it a secure grip where a threaded base alone would pull loose. That makes it a good fit for a lot of factory polymer rifle and shotgun stocks.
Does this base rotate once a swivel is installed?
No, and that's the whole point. The non-rotating design keeps the swivel from spinning, which stops a tactical sling from twisting up on you. If you've dealt with a free-rotating base rolling your sling around, this style solves that problem.
Which swivels work with the GrovTec flanged base?
It's designed to accept GrovTec push-button swivels, so you can pair it with the QD swivel of your choice from their lineup. The base gives you the mounting socket and the swivel snaps in with the push button. Just grab a matching GrovTec push-button swivel to complete the setup.
How is the flanged base installed?
You seat it into the stock, tighten the three included set screws, and lock it down with the retainer nut from inside the stock. Basic hand tools get the job done and no gunsmithing is required for most stocks. Once it's snugged up, it's meant to stay put for the long haul.




Reviews
There are no reviews yet.