0
0

Burn Proof Gear Heavy Suppressor Cover 7″ x 1.5″ Black Kevlar

UPC: 644042980595

$225.00

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A suppressor gets stupid hot in a hurry, and one careless grab or a can swinging into your leg on a sling transition is all it takes to learn that the hard way. The Burn Proof Gear Heavy Suppressor Cover exists to solve exactly that problem, and this company has built its entire reputation around doing it right. This 7 inch black version fits suppressors with a 1.5 inch diameter and covers popular hosts running .223, 5.56 NATO, 300 BLK, .308, and 7.62 NATO.

How the Heavy Suppressor Cover Handles Real Heat

The Heavy model uses a two part system: a fire retardant Kevlar outer cover rated up to 1000 degrees Fahrenheit paired with an inner fiberglass mesh liner that can take up to 2000 degrees. That inner sleeve is replaceable, so when it eventually wears from hard use, you swap the sleeve instead of buying a whole new cover. It is full auto capable, so mag dumps and high round count training days are well within its comfort zone. Beyond burn protection, it knocks down heat mirage over your optic and cuts your IR signature, which matters whether you are shooting groups at distance or running night vision.

Burn Proof Gear's No-Slip Fit

Every Burn Proof Gear cover is built a half inch longer than the suppressor it is made for, which lets the cover cinch around both the front and rear of the can. That patented design is what keeps it planted through recoil and heat cycles instead of creeping toward your muzzle like cheaper covers tend to do. It only adds about a quarter inch to the diameter and weighs right around 4 ounces, so it will not throw off the balance of your rifle.

Built in the USA, Backed for Life

These covers are made in the United States from aerospace and military grade fire retardant materials, and Burn Proof Gear stands behind them with a lifetime guarantee. This gear has seen genuine hard use in the field, and it shows in how well thought out the design is. Measure your can before ordering, since the Heavy cover is sized specifically for 1.5 inch diameter suppressors, and pick the length that matches yours.

Key Specifications

  • Manufacturer: Burn Proof Gear
  • Model: Suppressor Cover Heavy
  • Manufacturer Part Number: BPG-SC-H-7-1-5-BLK
  • UPC: 644042980595
  • Color: Black
  • Cover Length: 7 inches
  • Fits Suppressor Diameter: 1.5 inches
  • Outer Material: DuPont Kevlar, rated to 1000°F
  • Inner Liner: Fiberglass mesh, rated to 2000°F
  • Weight: Approximately 4 oz
  • Added Diameter: Approximately 0.25 inches
  • Caliber Compatibility: .223, 5.56 NATO, 300 BLK, .308, 7.62 NATO
  • Fire Rate Capability: Full auto capable
  • Country of Origin: Made in USA
  • Warranty: Lifetime guarantee

What’s Included

  • Burn Proof Gear Heavy Suppressor Cover 7" x 1.5" (Black)
  • Pre-installed replaceable fire retardant inner sleeve

Frequently Asked Questions

Will the Burn Proof Gear Heavy Suppressor Cover fit my suppressor?

The Heavy cover is built specifically for suppressors with a 1.5 inch diameter, so measure your can before ordering. Burn Proof Gear sizes their covers a half inch longer than the suppressor so the ends can cinch around the front and rear for a no-slip fit. If your can is a different diameter, this cover will not fit correctly, so double check those numbers first.

How hot can this suppressor cover get before it fails?

The Kevlar outer shell is rated up to 1000 degrees Fahrenheit and the inner fiberglass mesh liner handles up to 2000 degrees. It is full auto capable, so normal range sessions, training courses, and even sustained rapid fire are within its limits. The inner sleeve is also replaceable, which extends the life of the cover considerably.

Does the Heavy Suppressor Cover slide around under recoil?

No, and that is one of the biggest reasons people choose Burn Proof Gear over budget options. The cover is cut 0.5 inches longer than the suppressor so it cinches down tight around both ends, which is the basis of their patented no-slip fit. Once it is installed properly, it stays put through heat cycles and recoil.

Does a suppressor cover help with heat mirage over my optic?

Yes, that is one of its main jobs. A hot can throws off shimmering heat waves right in your sight picture, which makes precise shots at distance a real headache. This cover contains that heat, cutting mirage significantly, and it also reduces your IR signature for anyone running night vision or thermal gear.

Additional information

UPC

644042980595

Manufacturer

Manufacturer Part Number

BPG-SC-H-7-1-5-BLK

Color

Black

Model

Product Type

Cover

Reviews

There are no reviews yet.

Be the first to review “Burn Proof Gear Heavy Suppressor Cover 7″ x 1.5″ Black Kevlar”